Hello, I'm beginning the process of setting up a node with an Alinco radio and a URI. I have tried to execute the following command "radio tune rxnoise" and received the following message: "DONE tries=12, setting=1000, meas=1058, sqnoise=290 ERROR: RX INPUT ADJUST FAILED. [Oct 30 06:47:51] NOTICE[2525]: chan_iax2.c:9712 socket_process: Registration of '1999' rejected: 'Registration Refused' from: '67.215.233.178'" I'm extremely new to thjs, and would appreciate any help. Thanks and 73 Peter VK3TKK
You'll need to be using discriminator audio for that which depends on the model of the radio and how deeply you want to dig into it. I use motorola's because it's all on the accessory connector. It also looks like you don't have your node setup because 1999 is the default node number for a new install. Jeff ________________________________ From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Peter Watkins Sent: Tuesday, October 30, 2012 4:25 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Alinco/URI setup Hello, I'm beginning the process of setting up a node with an Alinco radio and a URI. I have tried to execute the following command "radio tune rxnoise" and received the following message: "DONE tries=12, setting=1000, meas=1058, sqnoise=290 ERROR: RX INPUT ADJUST FAILED. [Oct 30 06:47:51] NOTICE[2525]: chan_iax2.c:9712 socket_process: Registration of '1999' rejected: 'Registration Refused' from: '67.215.233.178'" I'm extremely new to thjs, and would appreciate any help. Thanks and 73 Peter VK3TKK
Alinco "DR" FM radios from 6m to 440 have a 9600 packet output that works well with asterisk. The DB9 connector in the back is easy to wire up. You put the radio in packet mode then the speaker is muted. Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jeffrey S. Carrier Sent: Wednesday, October 31, 2012 6:31 PM To: Peter Watkins; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Alinco/URI setup You'll need to be using discriminator audio for that which depends on the model of the radio and how deeply you want to dig into it. I use motorola's because it's all on the accessory connector. It also looks like you don't have your node setup because 1999 is the default node number for a new install. Jeff _____ From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Peter Watkins Sent: Tuesday, October 30, 2012 4:25 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Alinco/URI setup Hello, I'm beginning the process of setting up a node with an Alinco radio and a URI. I have tried to execute the following command "radio tune rxnoise" and received the following message: "DONE tries=12, setting=1000, meas=1058, sqnoise=290 ERROR: RX INPUT ADJUST FAILED. [Oct 30 06:47:51] NOTICE[2525]: chan_iax2.c:9712 socket_process: Registration of '1999' rejected: 'Registration Refused' from: '67.215.233.178'" I'm extremely new to thjs, and would appreciate any help. Thanks and 73 Peter VK3TKK
On 10/31/12 8:32 PM, Ken wrote:
Alinco "DR" FM radios from 6m to 440 have a 9600 packet output that works well with asterisk. The DB9 connector in the back is easy to wire up.
Took me all of a half hour to wire up and create the necessary files in the /etc/asterisk directory.
You put the radio in packet mode then the speaker is muted.
Don't forget to lock the radio on the frequency, either. So...when it comes back up it is where it belongs. -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.
I'm noticing the F/W version on my rtcm's is 1.05 dated 3/9/2012. I think I found a much newer version but so far nothing on the procedure to update the firmware. Can it be done over the network or only locally and is there documentation on this that I've missed? Thanks Jeff K0JSC
You need the two files you will find here. http://svn.ohnosec.org/viewvc/projects/allstar/voter/EBLEX%20C30%20Programme... and one of the .cry files from here http://svn.ohnosec.org/viewvc/projects/allstar/voter/board-firmware/?root=sv... or the source files and compile your self using the microchip compiler. The ones with SMT in the name are for the RTCM and the ones without are for the original voter board. Make sure you use the right one for the hardware that you have. Run ENC_loader.exe and enter the Target ip address of your RTCM and click "set address" click file and select the Voter-SMT.cry file that you downloaded. telnet to the RTCM and login Make sure that the Bootloader ip address is set to an appropriate value and saved. Issue the "r" command to reboot. Immediately click the "Capture Target" button in the Encrypted Ethernet Loader Utility. Once you see the message "LIA Status: 4000" you can click the "Program" button. Wait till you see the "finished programing file" message. Then click the "Reset LIA" button. Give it a minute and then it should be up and running the new software. I know that it works when you are on the same LAN as the RTCM. It works over a routed network if the routers properly forward UDP port 16388 and do proxy arp. I have had trouble getting it to work over the Internet via NAT at both ends. Chuck On Thu, Nov 1, 2012 at 9:24 PM, Jeffrey S. Carrier < jeff.carrier@rmsmsecurity.com> wrote:
I'm noticing the F/W version on my rtcm's is 1.05 dated 3/9/2012. I think I found a much newer version but so far nothing on the procedure to update the firmware. Can it be done over the network or only locally and is there documentation on this that I've missed?
Thanks Jeff K0JSC _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (5)
-
Bryan D. Boyle -
Chuck Henderson -
Jeffrey S. Carrier -
Ken -
Peter Watkins