Ah Hahh! Ken, you are the one with the vital clue I missed! I neglected to add the port to the IP address... once I did this, it worked!! During this process I also discovered that I hadn't enabled the port forwarding rule in my internet router for my new nodes PC. I assume this is why I couldn't connect to it from my VOIP box or the my other node. I had the rule entered, but hadn't checked the tick box to enable it. Everything is now falling into place... many thanks to all who replied. Michael. VK5ZEA On 10/09/2011 21:48, Ken wrote:

Account name is the asterisk node number Description is anything you want Host is the full IP address:port number Username is gui Password is that secret you mentioned Type usually is duplex

GL Ken

...

-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Michael Carey Sent: Saturday, September 10, 2011 4:32 AM To: app_rpt mailing list Subject: [App_rpt-users] Setting up iaxRpt... any tips?

Hi Everybody,

I am trying to set up iaxRpt on my laptop to link to my AllStar node. I've been following some info in the ACID System Administrators Guide (dated 2008). I've added the mentioned entries in iax.conf and extensions.conf, entering my own "secret"... I'm connecting from within the same network as the node.

What do I need to enter in the accounts section of iaxRpt? I assume the "secret" gets entered in the password field, what do I put in the username field?

Please help a newbie...

Michael. VK5ZEA

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users