Jon, Run asl-menu. ssh should be running. On 07/01/2018 08:52 PM, Redbutton_Ctrl wrote:

?/Its been a while since I setup an node on rpi.

Noe I'm trying to setup on rpi 3b+ with the  latest image. (ASL_1.01-20180228)

I burned a sd card but the Rpi doesnt seem to connect to the router so can ssh in to it.

Hooked up a monitor and managed to get as far as to change password.

now what?

Is there a new manual to node set up and if so where is it located?

Cant seem to find any instructions.

The old image I used for rpi 2s seemed to work right out of the gate.

Can someone point me in the right direction?

Thanks,

Jon VA3RQ

--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Jon, You will need to edit /etc/ssh/sshd_conf and set allow web access to "YES" to access this freely from putty/winscp/filezilla. save and restart ssh Just as long as you know the security implications. Sure save ya a lot of work set'n'm up though ! ...mike/kb8jnm On 7/1/2018 8:52 PM, Redbutton_Ctrl wrote:

?/Its been a while since I setup an node on rpi.

Noe I'm trying to setup on rpi 3b+ with the  latest image. (ASL_1.01-20180228)

I burned a sd card but the Rpi doesnt seem to connect to the router so can ssh in to it.

Hooked up a monitor and managed to get as far as to change password.

now what?

Is there a new manual to node set up and if so where is it located?

Cant seem to find any instructions.

The old image I used for rpi 2s seemed to work right out of the gate.

Can someone point me in the right direction?

Thanks,

Jon VA3RQ

--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.