From the CLI, i s there a way to execute COP commands that do not have a DTMF function a ssociated?
Also what's the difference between "rpt fun" and "rpt fun1" ? Thanks. Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes" Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes"
node*CLI> rpt cmd Usage: rpt cmd <nodename> <cmd-name> <cmd-index> <cmd-args> Send a command to a node. i.e. rpt cmd 2000 ilink 3 2001 replace <cmd-name> with cop. -- Tim On Sep 6, 2011, at 5:04 AM, Robert A. Poff WB3AWJ wrote:
From the CLI, is there a way to execute COP commands that do not have a DTMF function associated? Also what's the difference between "rpt fun" and "rpt fun1" ?
Thanks.
Robert A. Poff Loganville, PA.
"Lieutenant, target the offending power boat and launch photon torpedoes"
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Thanks Tim, I tried that but it didn't seem to work. But now I see what I was doing wrong. Even if the COP doesn't require an argument you still need to fill the field For example I used enable/disable the autopatch as a test. "rpt cmd 27783 cop 10" dosen't work but "rpt cmd 27783 cop 10 0" does. Don't know why I didn't think of that before. Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes" ----- Original Message ----- From: "Tim Sawyer" <tim.sawyer@me.com> To: "App rpt-users" <App_rpt-users@ohnosec.org> Sent: Tuesday, September 6, 2011 9:44:46 AM Subject: Re: [App_rpt-users] COP in CLI node*CLI> rpt cmd Usage: rpt cmd <nodename> <cmd-name> <cmd-index> <cmd-args> Send a command to a node. i.e. rpt cmd 2000 ilink 3 2001 replace <cmd-name> with cop. -- Tim
participants (2)
-
Robert A. Poff WB3AWJ -
Tim Sawyer