OK - I added the LAN IP address to the node stanza ? ; ================weather radio=============== [1625] ; this is the internal number for node 2 1625 = radio@192.168.1.109/1625,NONE ? and since that didn't work I also added a line to extensions.conf ? [radio-secure] exten => 1625,1,rpt,1625 exten => 27061,1,rpt,27061 ? > but when I try to connect (unregistered) node 1625 to 27061 it fails< looks like it is still going out port 5679 to the allstar registration server ? ==== Connected to Asterisk SVN--r736 currently running on atom (pid = 4395) Verbosity is at least 3 atom*CLI> rpt fun 1625 *327061 ??? -- Accepting UNAUTHENTICATED call from 127.0.0.1: ?????? > requested format = gsm, ?????? > requested prefs = (gsm|g726aal2|ulaw), ?????? > actual format = g726aal2, ?????? > host prefs = (g726aal2|gsm), ?????? > priority = mine ??? -- Call accepted by 127.0.0.1 (format g726aal2) ??? -- Format for call is g726aal2 ??? -- Executing [27061@radio-secure:1] Rpt("IAX2/127.0.0.1:4569-820", "27061") in new stack [Jul 18 11:24:06] WARNING[4498]: app_rpt.c:20669 rpt_exec: Reported node 1625 cannot be found!! ? == Spawn extension (radio-secure, 27061, 1) exited non-zero on 'IAX2/127.0.0.1:4569-820' ??? -- Hungup 'IAX2/127.0.0.1:4569-820' ??? -- Hungup 'IAX2/127.0.0.1:4569-8371' ??? -- Hungup 'Zap/pseudo-1055354295' ??? -- Hungup 'Zap/pseudo-767036577' ??? -- <Zap/pseudo-600898536> Playing 'rpt/node' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/2' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/7' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/0' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/6' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/1' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'rpt/connection_failed' (language 'en') ??? -- Hungup 'Zap/pseudo-600898536' ========================================================
Ken wrote:
OK - I added the LAN IP address to the node stanza ? ; ================weather radio=============== [1625] ; this is the internal number for node 2 1625 = radio@192.168.1.109/1625,NONE ? and since that didn't work I also added a line to extensions.conf ? [radio-secure] exten => 1625,1,rpt,1625 exten => 27061,1,rpt,27061 ? > but when I try to connect (unregistered) node 1625 to 27061 it fails< looks like it is still going out port 5679 to the allstar registration server
? ==== Connected to Asterisk SVN--r736 currently running on atom (pid = 4395) Verbosity is at least 3 atom*CLI> rpt fun 1625 *327061 ??? -- Accepting UNAUTHENTICATED call from 127.0.0.1: ?????? > requested format = gsm, ?????? > requested prefs = (gsm|g726aal2|ulaw), ?????? > actual format = g726aal2, ?????? > host prefs = (g726aal2|gsm), ?????? > priority = mine ??? -- Call accepted by 127.0.0.1 (format g726aal2) ??? -- Format for call is g726aal2 ??? -- Executing [27061@radio-secure:1] Rpt("IAX2/127.0.0.1:4569-820", "27061") in new stack [Jul 18 11:24:06] WARNING[4498]: app_rpt.c:20669 rpt_exec: Reported node 1625 cannot be found!! ? == Spawn extension (radio-secure, 27061, 1) exited non-zero on 'IAX2/127.0.0.1:4569-820' ??? -- Hungup 'IAX2/127.0.0.1:4569-820' ??? -- Hungup 'IAX2/127.0.0.1:4569-8371' ??? -- Hungup 'Zap/pseudo-1055354295' ??? -- Hungup 'Zap/pseudo-767036577' ??? -- <Zap/pseudo-600898536> Playing 'rpt/node' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/2' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/7' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/0' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/6' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/1' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'rpt/connection_failed' (language 'en') ??? -- Hungup 'Zap/pseudo-600898536' ========================================================
------------------------------------------------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
1. Registation is irrelevant for private nodes. 2. Two smoking guns:
??? -- Accepting UNAUTHENTICATED call from 127.0.0.1:
??? -- Executing [27061@radio-secure:1] Rpt("IAX2/127.0.0.1:4569-820", "27061") in new stack [Jul 18 11:24:06] WARNING[4498]: app_rpt.c:20669 rpt_exec: Reported node 1625 cannot be found!! ? == Spawn extension (radio-secure, 27061, 1) exited non-zero on 'IAX2/127.0.0.1:4569-820'
This node is trying to connect to itself. Suggest you post your rpt.conf files for review and comment to the group with the DTMF function stanzas removed. Steve WA6ZFT
I found that if I modify rpt_extnodes as follows, it will connect [extnodes] 1625 = radio@192.168.1.109/1625,127.0.0.1 2000 = radio@67.215.233.178/2000,67.215.233.178 2001 = radio@64.118.102.138:4569/2001,64.118.102.138 2002 = radio@64.118.103.70:4569/2002,64.118.103.70 2003 = radio@64.118.103.71:4569/2003,64.118.103.71 2004 = radio@64.118.103.71:4569/2004,64.118.103.71 2005 = radio@64.118.103.70:4569/2005,64.118.103.70,y ... etc etc ... Of course, after a while this gets over-written ... but the node stays connected =============================== So - here is everything Description - 1625 - intended to be a non-registered node for the weather radio, uses a fob (which works) 27061 - a happily registered allstar node Both running on the same computer I want to connect 27061 to 1625 (or vice versa) This was the first step ... before trying to connect it to a different computer on the same sub net. After making any change I do astdn.sh/astup.sh Rpt.conf looks like: ; Radio Repeater configuration file (for use with app_rpt) ; version 255 ; ; W4BRM Repeater - Atom Dual Core ; actually there is no 927 machine connected - yet ; ================weather radio=============== ; [1625] 1625 = radio@192.168.1.109/1625,NONE ; rxchannel = Radio/usb1625 ; Rx audio/signalling channel irxgain=-3 ; IRLP receive gain adjustment default -10 ; Note: Gain is in db-volts (20logVI/VO) itxgain=3 ; IRLP transmit gain adjustment default +10 ; Note: Gain is in db-volts (20logVI/VO) erxgain=-3 ; Echolink receive gain adjustment ; Note: Gain is in db-volts (20logVI/VO) etxgain=3 ; Echolink transmit gain adjustment ; Note: Gain is in db-volts (20logVI/VO) controlstates=controlstates ; system control state list scheduler=schedule; ; scheduler entries functions=functions ; Repeater Function Table phone_functions=functions ; Repeater Function Table link_functions=functions ; Link Function Table telemetry=telemetry ; Telemetry descriptions wait_times=wait-times ; Wait times context = radio ; dialing context for phone callerid = "Repeater" <0000000000> ; callerid for phone calls ;idrecording = none ; Main ID message /var/lib/asterisk/sounds/ ;tailmessagelist=welcome,clubmeeting,wx ; need to record some accountcode=RADIO ; account code (optional) hangtime=1000 ; squelch tail hang time (in ms) (optional) althangtime=4000 ; longer squelch tail totime=170000 ; transmit time-out time (in ms) (optional) ;totime=10000 idtime=900000 ; id interval time (in ms) (optional) ;tailmessagetime=900000 ;15 minutes between tail messages ; The default values for hangtime, time-out time, and id interval time are ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) ; respectively politeid=60000 ; time in milliseconds before ID timer ; expires to try and ID in the tail. ; (optional, default is 30000). ;idtalkover=|iW4BRM/L ; Talkover ID (optional) default is none unlinkedct=ct1 ; unlinked courtesy tone (optional) default is none remotect=ct3 ; remote linked courtesy tone (indicates a remote is in the list of links) linkunkeyct=ct8 ; sent when a transmission received over the link unkeys ; no status reporting needed ;=====the 927 MHz repeater ====================================== [27061] ; this is the allstar number for node 2 rxchannel = Radio/usb27061 ; Rx audio/signalling channel irxgain=-3 ; IRLP receive gain adjustment default -10 ; Note: Gain is in db-volts (20logVI/VO) itxgain=3 ; IRLP transmit gain adjustment default +10 ; Note: Gain is in db-volts (20logVI/VO) erxgain=-3 ; Echolink receive gain adjustment ; Note: Gain is in db-volts (20logVI/VO) etxgain=3 ; Echolink transmit gain adjustment ; Note: Gain is in db-volts (20logVI/VO) controlstates=controlstates ; system control state list scheduler=schedule; ; scheduler entries functions=functions ; Repeater Function Table phone_functions=functions ; Repeater Function Table link_functions=functions ; Link Function Table telemetry=telemetry ; Telemetry descriptions wait_times=wait-times ; Wait times context = radio ; dialing context for phone callerid = "Repeater" <0000000000> ; callerid for phone calls ;idrecording = none ; Main ID message /var/lib/asterisk/sounds/ ;tailmessagelist=welcome,clubmeeting,wx ; need to record some accountcode=RADIO ; account code (optional) hangtime=1000 ; squelch tail hang time (in ms) (optional) althangtime=4000 ; longer squelch tail totime=170000 ; transmit time-out time (in ms) (optional) ;totime=10000 idtime=900000 ; id interval time (in ms) (optional) ;tailmessagetime=900000 ;15 minutes between tail messages ; The default values for hangtime, time-out time, and id interval time are ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) ; respectively politeid=60000 ; time in milliseconds before ID timer ; expires to try and ID in the tail. ; (optional, default is 30000). idtalkover=|iW4BRM/L ; Talkover ID (optional) default is none unlinkedct=ct1 ; unlinked courtesy tone (optional) default is none remotect=ct3 ; remote linked courtesy tone (indicates a remote is in the list of links) linkunkeyct=ct8 ; sent when a transmission received over the link unkeys ;nolocallinkct=0 ; Send unlinkedct instead if another local node is connected to this node (hosted on the same PC). ;irplann=1 ; Default: 1 = Play irlp connect and disconnect announcements ; 0 = Disable irlp connect and disconnect announcements ;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects ;connpgm=yourconnectprogram ; Default: Disabled. Execute a program you specify on connect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being connected to us (them) ;discpgm=yourdisconnectprogram ; Default: Disabled. Execute a program you specify on disconnect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being disconnected from us (them) ;linkactenable=0 ; Set to 1 to enable the link activity timer. Applicable to standard nodes only. ;lnkacttime=1800 ; Link activity timer time in seconds. ;lnkactmacro=*52 ; Function to execute when link activity timer expires. ;lnkacttimerwarn=30seconds ; Message to play when the link activity timer has 30 seconds left. ;remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable). ;remote_timeout=3600 ; Session time out for remote base. (set to 0 to disable) ;nounkeyct=0 ; Set to a 1 to eliminate courtesy tones and associated delays. ;holdofftelem=0 ; Hold off all telemetry when signal is present on receiver or from connected nodes ; ; except when an ID needs to be done and there is a signal coming from a connected node. ;beaconing=0 ; Send ID regardless of repeater activity (Required in the UK, but probably illegal in the US) ; ; ; *** Status Reporting *** second node ; ; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org ; depending on whether you are running ACID or Limey Linux. ; ** For ACID *** statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/ dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; ** For Limey Linux ** ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev /null ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ;================================================ [functions] 1=ilink,1 ; Specific link disconnect 2=ilink,2 ; Specific Link connect - monitor only 3=ilink,3 ; Specific Link connect - transceive 4=ilink,4 ; Enter command mode on a specific link 5=macro,1 ; Command macros (Defined in the macro section) (etc) (etc) ---------------------------------------------------------------------------- --- Extensions.conf has this in it general] static=yes ; These two lines prevent the command-line interface writeprotect=yes ; from overwriting the config file. Leave them here. [globals] VOIPTERM=yourprovider HOMENPA=619 NODE=27061 [default] exten => _1NXXNXXXXXX,1,Dial(IAX2/${VOIPTERM}/${EXTEN},40,L(180000:30000)) exten => _1NXXNXXXXXX,2,Hangup [radio-secure] exten => 1625,1,rpt,1625 exten => 27061,1,rpt,27061 [invalidnum] exten=s,1,Wait,3 exten=s,n,Playback,ss-noservice exten=s,n,Wait,1 exten=s,n,Hangup (etc) (etc) ---end of the new posting ---------------------------------------------------------
-----Original Message----- From: Stephen Rodgers [mailto:sales@qrvc.com] Sent: Sunday, July 18, 2010 1:32 PM To: Ken Cc: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] internal node: more help needed
OK - I added the LAN IP address to the node stanza ? ; ================weather radio=============== [1625] ; this is the internal number for node 2 1625 = radio@192.168.1.109/1625,NONE ? and since that didn't work I also added a line to extensions.conf ? [radio-secure] exten => 1625,1,rpt,1625 exten => 27061,1,rpt,27061 ?
but when I try to connect (unregistered) node 1625 to 27061 it fails< looks like it is still going out port 5679 to the allstar registration server
? ==== Connected to Asterisk SVN--r736 currently running on atom (pid =
Ken wrote: 4395)
Verbosity is at least 3 atom*CLI> rpt fun 1625 *327061 ??? -- Accepting UNAUTHENTICATED call from 127.0.0.1: ?????? > requested format = gsm, ?????? > requested prefs = (gsm|g726aal2|ulaw), ?????? > actual format = g726aal2, ?????? > host prefs = (g726aal2|gsm), ?????? > priority = mine ??? -- Call accepted by 127.0.0.1 (format g726aal2) ??? -- Format for call is g726aal2 ??? -- Executing [27061@radio-secure:1] Rpt("IAX2/127.0.0.1:4569- 820", "27061") in new stack [Jul 18 11:24:06] WARNING[4498]: app_rpt.c:20669 rpt_exec: Reported node 1625 cannot be found!! ? == Spawn extension (radio-secure, 27061, 1) exited non-zero on 'IAX2/127.0.0.1:4569-820' ??? -- Hungup 'IAX2/127.0.0.1:4569-820' ??? -- Hungup 'IAX2/127.0.0.1:4569-8371' ??? -- Hungup 'Zap/pseudo-1055354295' ??? -- Hungup 'Zap/pseudo-767036577' ??? -- <Zap/pseudo-600898536> Playing 'rpt/node' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/2' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/7' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/0' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/6' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'digits/1' (language 'en') ??? -- <Zap/pseudo-600898536> Playing 'rpt/connection_failed' (language 'en') ??? -- Hungup 'Zap/pseudo-600898536' ========================================================
---------------------------------------------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
1. Registation is irrelevant for private nodes. 2. Two smoking guns:
??? -- Accepting UNAUTHENTICATED call from 127.0.0.1:
??? -- Executing [27061@radio-secure:1] Rpt("IAX2/127.0.0.1:4569- 820", "27061") in new stack [Jul 18 11:24:06] WARNING[4498]: app_rpt.c:20669 rpt_exec: Reported node 1625 cannot be found!! ? == Spawn extension (radio-secure, 27061, 1) exited non-zero on 'IAX2/127.0.0.1:4569-820'
This node is trying to connect to itself.
Suggest you post your rpt.conf files for review and comment to the group with the DTMF function stanzas removed.
Steve WA6ZFT
Ken wrote:
> I found that if I modify rpt_extnodes as follows, it will connect
>
> [extnodes]
> 1625 = radio@192.168.1.109/1625,127.0.0.1
> 2000 = radio@67.215.233.178/2000,67.215.233.178
> 2001 = radio@64.118.102.138:4569/2001,64.118.102.138
> 2002 = radio@64.118.103.70:4569/2002,64.118.103.70
> 2003 = radio@64.118.103.71:4569/2003,64.118.103.71
> 2004 = radio@64.118.103.71:4569/2004,64.118.103.71
> 2005 = radio@64.118.103.70:4569/2005,64.118.103.70,y
> ... etc etc ...
> Of course, after a while this gets over-written ... but the node stays
> connected
> ===============================
>
> So - here is everything
> Description -
> 1625 - intended to be a non-registered node for the weather radio, uses a
> fob (which works)
> 27061 - a happily registered allstar node
> Both running on the same computer
> I want to connect 27061 to 1625 (or vice versa)
> This was the first step ... before trying to connect it to a different
> computer on the same sub net.
> After making any change I do astdn.sh/astup.sh
>
> Rpt.conf looks like:
> ; Radio Repeater configuration file (for use with app_rpt)
> ; version 255
> ;
> ; W4BRM Repeater - Atom Dual Core
> ; actually there is no 927 machine connected - yet
> ; ================weather radio===============
> ;
> [1625]
> 1625 = radio@192.168.1.109/1625,NONE ;
> rxchannel = Radio/usb1625 ; Rx audio/signalling channel
> irxgain=-3 ; IRLP receive gain adjustment
> default -10
> ; Note: Gain is in db-volts
> (20logVI/VO)
> itxgain=3 ; IRLP transmit gain adjustment
> default +10
> ; Note: Gain is in db-volts
> (20logVI/VO)
> erxgain=-3 ; Echolink receive gain adjustment
> ; Note: Gain is in db-volts
> (20logVI/VO)
> etxgain=3 ; Echolink transmit gain adjustment
> ; Note: Gain is in db-volts
> (20logVI/VO)
> controlstates=controlstates ; system control state list
> scheduler=schedule; ; scheduler entries
> functions=functions ; Repeater Function Table
> phone_functions=functions ; Repeater Function Table
> link_functions=functions ; Link Function Table
> telemetry=telemetry ; Telemetry descriptions
> wait_times=wait-times ; Wait times
> context = radio ; dialing context for phone
> callerid = "Repeater" <0000000000> ; callerid for phone calls
> ;idrecording = none ; Main ID message
> /var/lib/asterisk/sounds/
> ;tailmessagelist=welcome,clubmeeting,wx ; need to record some
> accountcode=RADIO ; account code (optional)
> hangtime=1000 ; squelch tail hang time (in ms)
> (optional)
> althangtime=4000 ; longer squelch tail
> totime=170000 ; transmit time-out time (in ms)
> (optional)
> ;totime=10000
> idtime=900000 ; id interval time (in ms)
> (optional)
> ;tailmessagetime=900000 ;15 minutes between tail messages
> ; The default values for hangtime,
> time-out time, and id interval time are
> ; 5 seconds (5000 ms), 3 minutes
> (180000 ms), and 5 minutes (300000 ms)
> ; respectively
> politeid=60000 ; time in milliseconds before ID timer
> ; expires to try and ID in the tail.
> ; (optional, default is 30000).
> ;idtalkover=|iW4BRM/L ; Talkover ID (optional) default is
> none
> unlinkedct=ct1 ; unlinked courtesy tone (optional) default
> is none
> remotect=ct3 ; remote linked courtesy tone
> (indicates a remote is in the list of links)
> linkunkeyct=ct8 ; sent when a transmission received over the
> link unkeys
> ; no status reporting needed
> ;=====the 927 MHz repeater ======================================
> [27061] ; this is the allstar number for node 2
> rxchannel = Radio/usb27061 ; Rx audio/signalling channel
> irxgain=-3 ; IRLP receive gain adjustment
> default -10
> ; Note: Gain is in db-volts
> (20logVI/VO)
> itxgain=3 ; IRLP transmit gain adjustment
> default +10
> ; Note: Gain is in db-volts
> (20logVI/VO)
> erxgain=-3 ; Echolink receive gain adjustment
> ; Note: Gain is in db-volts
> (20logVI/VO)
> etxgain=3 ; Echolink transmit gain adjustment
> ; Note: Gain is in db-volts
> (20logVI/VO)
> controlstates=controlstates ; system control state list
> scheduler=schedule; ; scheduler entries
> functions=functions ; Repeater Function Table
> phone_functions=functions ; Repeater Function Table
> link_functions=functions ; Link Function Table
> telemetry=telemetry ; Telemetry descriptions
> wait_times=wait-times ; Wait times
> context = radio ; dialing context for phone
> callerid = "Repeater" <0000000000> ; callerid for phone calls
> ;idrecording = none ; Main ID message
> /var/lib/asterisk/sounds/
> ;tailmessagelist=welcome,clubmeeting,wx ; need to record some
> accountcode=RADIO ; account code (optional)
> hangtime=1000 ; squelch tail hang time (in ms)
> (optional)
> althangtime=4000 ; longer squelch tail
> totime=170000 ; transmit time-out time (in ms)
> (optional)
> ;totime=10000
> idtime=900000 ; id interval time (in ms)
> (optional)
> ;tailmessagetime=900000 ;15 minutes between tail messages
> ; The default values for hangtime,
> time-out time, and id interval time are
> ; 5 seconds (5000 ms), 3 minutes
> (180000 ms), and 5 minutes (300000 ms)
> ; respectively
> politeid=60000 ; time in milliseconds before ID timer
> ; expires to try and ID in the tail.
> ; (optional, default is 30000).
> idtalkover=|iW4BRM/L ; Talkover ID (optional) default is
> none
> unlinkedct=ct1 ; unlinked courtesy tone (optional) default
> is none
> remotect=ct3 ; remote linked courtesy tone
> (indicates a remote is in the list of links)
> linkunkeyct=ct8 ; sent when a transmission received over the
> link unkeys
> ;nolocallinkct=0 ; Send unlinkedct instead if another
> local node is connected to this node (hosted on the same PC).
> ;irplann=1 ; Default: 1 = Play irlp connect and
> disconnect announcements
> ; 0 = Disable irlp connect and
> disconnect announcements
> ;eannmode=1 ; Default: 1 = Say only node number
> on echolink connects
> ; 2 = say phonetic call sign only on
> echolink connects
> ; 3 = say phonetic call sign and
> node number on echolink connects
> ;connpgm=yourconnectprogram ; Default: Disabled. Execute a
> program you specify on connect.
> ; passes 2 command line arguments to
> your program:
> ; 1. node number in this stanza (us)
> ; 2. node number being connected to
> us (them)
> ;discpgm=yourdisconnectprogram ; Default: Disabled. Execute a program you
> specify on disconnect.
> ; passes 2 command line arguments to
> your program:
> ; 1. node number in this stanza (us)
> ; 2. node number being disconnected
> from us (them)
> ;linkactenable=0 ; Set to 1 to enable the link
> activity timer. Applicable to standard nodes only.
> ;lnkacttime=1800 ; Link activity timer time in
> seconds.
> ;lnkactmacro=*52 ; Function to execute when link
> activity timer expires.
> ;lnkacttimerwarn=30seconds ; Message to play when the link
> activity timer has 30 seconds left.
> ;remote_inact_timeout=1800 ; Inactivity timer for remote base
> nodes only (set to 0 to disable).
> ;remote_timeout=3600 ; Session time out for remote base.
> (set to 0 to disable)
> ;nounkeyct=0 ; Set to a 1 to eliminate courtesy
> tones and associated delays.
> ;holdofftelem=0 ; Hold off all telemetry when signal is
> present on receiver or from connected nodes
> ; ; except when an ID needs to be done
> and there is a signal coming from a connected node.
> ;beaconing=0 ; Send ID regardless of repeater
> activity (Required in the UK, but probably illegal in the US)
> ;
> ;
> ; *** Status Reporting *** second node
> ;
> ; Uncomment the either group following two statpost lines to report the
> status of your node to stats.allstarlink.org
> ; depending on whether you are running ACID or Limey Linux.
>
> ; ** For ACID ***
> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/
> dev/null
> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
>
> ; ** For Limey Linux **
> ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev
> /null
> ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
> ;================================================
> [functions]
> 1=ilink,1 ; Specific link disconnect
> 2=ilink,2 ; Specific Link connect - monitor
> only
> 3=ilink,3 ; Specific Link connect - transceive
> 4=ilink,4 ; Enter command mode on a specific
> link
> 5=macro,1 ; Command macros (Defined in the
> macro section)
> (etc)
> (etc)
> ----------------------------------------------------------------------------
> ---
> Extensions.conf has this in it
>
> general]
>
> static=yes ; These two lines prevent the command-line interface
> writeprotect=yes ; from overwriting the config file. Leave them here.
>
> [globals]
> VOIPTERM=yourprovider
> HOMENPA=619
> NODE=27061
>
> [default]
>
> exten => _1NXXNXXXXXX,1,Dial(IAX2/${VOIPTERM}/${EXTEN},40,L(180000:30000))
> exten => _1NXXNXXXXXX,2,Hangup
>
> [radio-secure]
> exten => 1625,1,rpt,1625
> exten => 27061,1,rpt,27061
>
> [invalidnum]
> exten=s,1,Wait,3
> exten=s,n,Playback,ss-noservice
> exten=s,n,Wait,1
> exten=s,n,Hangup
>
> (etc)
> (etc)
>
> ---end of the new posting
> ---------------------------------------------------------
>
>
>
>
>> -----Original Message-----
>> From: Stephen Rodgers [mailto:sales@qrvc.com]
>> Sent: Sunday, July 18, 2010 1:32 PM
>> To: Ken
>> Cc: app_rpt-users@qrvc.com
>> Subject: Re: [App_rpt-users] internal node: more help needed
>>
>> Ken wrote:
>>> OK - I added the LAN IP address to the node stanza
>>> ?
>>> ; ================weather radio===============
>>> [1625] ; this is the internal number for node 2
>>> 1625 = radio@192.168.1.109/1625,NONE
>>> ?
>>> and since that didn't work I also added a line to extensions.conf
>>> ?
>>> [radio-secure]
>>> exten => 1625,1,rpt,1625
>>> exten => 27061,1,rpt,27061
>>> ?
>>>> but when I try to connect (unregistered) node 1625 to 27061 it
>> fails<
>>> looks like it is still going out port 5679 to the allstar
>> registration server
>>> ?
>>> ====
>>> Connected to Asterisk SVN--r736 currently running on atom (pid =
>> 4395)
>>> Verbosity is at least 3
>>> atom*CLI> rpt fun 1625 *327061
>>> ??? -- Accepting UNAUTHENTICATED call from 127.0.0.1:
>>> ?????? > requested format = gsm,
>>> ?????? > requested prefs = (gsm|g726aal2|ulaw),
>>> ?????? > actual format = g726aal2,
>>> ?????? > host prefs = (g726aal2|gsm),
>>> ?????? > priority = mine
>>> ??? -- Call accepted by 127.0.0.1 (format g726aal2)
>>> ??? -- Format for call is g726aal2
>>> ??? -- Executing [27061@radio-secure:1] Rpt("IAX2/127.0.0.1:4569-
>> 820", "27061") in new stack
>>> [Jul 18 11:24:06] WARNING[4498]: app_rpt.c:20669 rpt_exec: Reported
>> node 1625 cannot be found!!
>>> ? == Spawn extension (radio-secure, 27061, 1) exited non-zero on
>> 'IAX2/127.0.0.1:4569-820'
>>> ??? -- Hungup 'IAX2/127.0.0.1:4569-820'
>>> ??? -- Hungup 'IAX2/127.0.0.1:4569-8371'
>>> ??? -- Hungup 'Zap/pseudo-1055354295'
>>> ??? -- Hungup 'Zap/pseudo-767036577'
>>> ??? -- <Zap/pseudo-600898536> Playing 'rpt/node' (language 'en')
>>> ??? -- <Zap/pseudo-600898536> Playing 'digits/2' (language 'en')
>>> ??? -- <Zap/pseudo-600898536> Playing 'digits/7' (language 'en')
>>> ??? -- <Zap/pseudo-600898536> Playing 'digits/0' (language 'en')
>>> ??? -- <Zap/pseudo-600898536> Playing 'digits/6' (language 'en')
>>> ??? -- <Zap/pseudo-600898536> Playing 'digits/1' (language 'en')
>>> ??? -- <Zap/pseudo-600898536> Playing 'rpt/connection_failed'
>> (language 'en')
>>> ??? -- Hungup 'Zap/pseudo-600898536'
>>> ========================================================
>>>
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>> ---
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users@qrvc.com
>>> http://qrvc.com/mailman/listinfo/app_rpt-users
>> 1. Registation is irrelevant for private nodes.
>> 2. Two smoking guns:
>>
>>> ??? -- Accepting UNAUTHENTICATED call from 127.0.0.1:
>>> ??? -- Executing [27061@radio-secure:1] Rpt("IAX2/127.0.0.1:4569-
>> 820", "27061") in new stack
>>> [Jul 18 11:24:06] WARNING[4498]: app_rpt.c:20669 rpt_exec: Reported
>> node 1625 cannot be found!!
>>> ? == Spawn extension (radio-secure, 27061, 1) exited non-zero on
>> 'IAX2/127.0.0.1:4569-820'
>>
>>
>> This node is trying to connect to itself.
>>
>> Suggest you post your rpt.conf files for review and comment to the
>> group with the DTMF function stanzas removed.
>>
>> Steve
>> WA6ZFT
>>
>>
>>
>>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
An entry needs to go in [nodes] stanza in rpt.conf pointing to the IP address of the other system.
This has to be done for both nodes. rpt_extnodes is for allstarlink use only and will get overwritten.
127.0.0.1 is the link local ip address, you need to use something similar to what was in your previous
post:
1625 = radio@192.168.1.109/1625,NONE
Steve
WA6ZFT
Thanks Steve for putting up with my mental density Conclusion: The IP address does not go in the node stanza It goes in the [nodes] stanza (further down the page). And it works. Ken Sigh
....>different Steve here.. & thanks for having the same issue I was about to have and helping me out passively :-) :-) Steve
Thanks Steve for putting up with my mental density
Conclusion:
The IP address does not go in the node stanza
It goes in the [nodes] stanza (further down the page).
And it works.
Ken
Sigh
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
Michigan Broadband Systems Inc. "Always Connected" (734)527-7150 Steve's cellphone: (734)904-1811 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
participants (3)
-
Ken -
Stephen Rodgers -
Steve Gladden