nothing has changed. The config files are the same as they always have been. The newer usb naming convention in your case my have come from a portal-generated configuration. JIM From: ckraly@gmail.com Date: Thu, 23 Dec 2010 09:52:26 -0600 To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] Fwd: Did something change ---------- Forwarded message ---------- From: Chuck Kraly <ckraly@gmail.com> Date: Thu, Dec 23, 2010 at 9:47 AM Subject: Did something change To: app_rpt mailing list <app_rpt-users@qrvc.com> or is it a hiccup on my end.... I wanted to rebuild a CF card for my node 27064 I downloaded the latest ISO, did the install and noticed that the build is "the old style"....no "usb27064.conf" and such. It follows the older build setup and that includes the way things are labeled in the rpt.conf stanzas. Did the ISO get reverted back or did I screw something up (again) Chuck K0XM 27064 and many more under the BYRG _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users