Happy Friday, Wondering how to properly configure rpt.conf to drop the transmitter after right after an ID is sent, with no input activity (local or remote). Right now it keys up, sends CT, drops. Keys back up, sends ID and waits about 4 seconds before dropping. Tail message timers are commented out (but not set to zero). It's a new install so I might have something not "standard", but felt I would ask here for examples. Also, I've combed through the archives, but is there a way to not encode PL during an ID if all the inputs are quiet? Maybe the Event Management Subsystem might be helpful, so we'll see. Thanks, Tony
I would also like to not encode PL during ID and hang time, when there is no repeater input signal, but have not yet found a way to do it. Chuck On Fri, Nov 12, 2010 at 11:38 AM, Tony KT9AC <kt9ac@ameritech.net> wrote:
Happy Friday, Wondering how to properly configure rpt.conf to drop the transmitter after right after an ID is sent, with no input activity (local or remote). Right now it keys up, sends CT, drops. Keys back up, sends ID and waits about 4 seconds before dropping. Tail message timers are commented out (but not set to zero).
It's a new install so I might have something not "standard", but felt I would ask here for examples.
Also, I've combed through the archives, but is there a way to not encode PL during an ID if all the inputs are quiet? Maybe the Event Management Subsystem might be helpful, so we'll see.
Thanks, Tony _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Well I didn't get that far in the docs before asking. Chuck, Try 'cop,58' for "TX CTCSS On Input only enable" and 'cop,59' to disable it. KB2EAR requested this about a year ago - "Add the ability to have the transmit CTCSS only while valid input is present, and off during hangtime, IDs, announcements etc. " I'm having fun though learning new things!! It pays to read the descriptions in the source code, even though its been years since I've touched C++. Sorry for the extra bandwidth. Tony On 11/12/2010 08:12 PM, Chuck Henderson wrote:
I would also like to not encode PL during ID and hang time, when there is no repeater input signal, but have not yet found a way to do it. Chuck
On Fri, Nov 12, 2010 at 11:38 AM, Tony KT9AC<kt9ac@ameritech.net> wrote:
Happy Friday, Wondering how to properly configure rpt.conf to drop the transmitter after right after an ID is sent, with no input activity (local or remote). Right now it keys up, sends CT, drops. Keys back up, sends ID and waits about 4 seconds before dropping. Tail message timers are commented out (but not set to zero).
It's a new install so I might have something not "standard", but felt I would ask here for examples.
Also, I've combed through the archives, but is there a way to not encode PL during an ID if all the inputs are quiet? Maybe the Event Management Subsystem might be helpful, so we'll see.
Thanks, Tony _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
participants (2)
-
Chuck Henderson -
Tony KT9AC