Hello all, Is it possible to setup individual users and restrict access for those users from functions in Allmon? For example, say I want to set up a user that can only connect and disconnect a node from the Allmon interface, but I don't want them to have access to the Control panel? Or I want them to have access to certain functions in the control panel? From what I have been able to find, I don't think it is possible, but I wanted to ask in case I missed something or someone had found a solution. Thanks much! Jeff, KC8QCH -- Jeff Lehman, KC8QCH https://kc8qch.ddns.net kc8qch@gmail.com Webmaster Hamilton Couny ARPSC https://www.hamcoarpsc.org hamcoarpsc@gmail.com AllStar 47374 Node Administrator World Wide Amateur Radio Guild https://theguildglobal.org
Sorry to say that is not in Allmon at this time. It's great idea and something I'd like to do. On Mon, Feb 5, 2018 at 6:47 AM, Jeffrey Lehman, KC8QCH <kc8qch@gmail.com> wrote:
Hello all,
Is it possible to setup individual users and restrict access for those users from functions in Allmon? For example, say I want to set up a user that can only connect and disconnect a node from the Allmon interface, but I don't want them to have access to the Control panel? Or I want them to have access to certain functions in the control panel? From what I have been able to find, I don't think it is possible, but I wanted to ask in case I missed something or someone had found a solution.
Thanks much!
Jeff, KC8QCH
-- Jeff Lehman, KC8QCH https://kc8qch.ddns.net kc8qch@gmail.com
Webmaster Hamilton Couny ARPSC https://www.hamcoarpsc.org hamcoarpsc@gmail.com
AllStar 47374 Node Administrator World Wide Amateur Radio Guild https://theguildglobal.org
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
Thanks Tim. I thought as much but just wanted to ask. That would be something cool to implement :) Jeff On 2/5/2018 22:50, Tim Sawyer wrote:
Sorry to say that is not in Allmon at this time. It's great idea and something I'd like to do.
On Mon, Feb 5, 2018 at 6:47 AM, Jeffrey Lehman, KC8QCH <kc8qch@gmail.com <mailto:kc8qch@gmail.com>> wrote:
Hello all,
Is it possible to setup individual users and restrict access for those users from functions in Allmon? For example, say I want to set up a user that can only connect and disconnect a node from the Allmon interface, but I don't want them to have access to the Control panel? Or I want them to have access to certain functions in the control panel? From what I have been able to find, I don't think it is possible, but I wanted to ask in case I missed something or someone had found a solution.
Thanks much!
Jeff, KC8QCH
-- Jeff Lehman, KC8QCH https://kc8qch.ddns.net kc8qch@gmail.com <mailto:kc8qch@gmail.com>
Webmaster Hamilton Couny ARPSC https://www.hamcoarpsc.org hamcoarpsc@gmail.com <mailto:hamcoarpsc@gmail.com>
AllStar 47374 Node Administrator World Wide Amateur Radio Guild https://theguildglobal.org
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Jeff Lehman, KC8QCH https://kc8qch.ddns.net kc8qch@gmail.com Webmaster Hamilton Couny ARPSC https://www.hamcoarpsc.org hamcoarpsc@gmail.com AllStar 47374 Node Administrator World Wide Amateur Radio Guild https://theguildglobal.org
Mulled this over also. You could do a little editing and have second copy of Allmon in a second directory and have separate commands list in the controlpanel.ini.php and different nodes listed in allmon.ini.php. I've been playing with it since you posted the question. Seems to be working. Unless Tim knows of something in the code that would be problematic. On Mon, Feb 5, 2018 at 10:50 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
Sorry to say that is not in Allmon at this time. It's great idea and something I'd like to do.
On Mon, Feb 5, 2018 at 6:47 AM, Jeffrey Lehman, KC8QCH <kc8qch@gmail.com> wrote:
Hello all,
Is it possible to setup individual users and restrict access for those users from functions in Allmon? For example, say I want to set up a user that can only connect and disconnect a node from the Allmon interface, but I don't want them to have access to the Control panel? Or I want them to have access to certain functions in the control panel? From what I have been able to find, I don't think it is possible, but I wanted to ask in case I missed something or someone had found a solution.
Thanks much!
Jeff, KC8QCH
-- Jeff Lehman, KC8QCH https://kc8qch.ddns.net kc8qch@gmail.com
Webmaster Hamilton Couny ARPSC https://www.hamcoarpsc.org hamcoarpsc@gmail.com
AllStar 47374 Node Administrator World Wide Amateur Radio Guild https://theguildglobal.org
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Nathan Hardman nhardman1428@gmail.com N8THN@ARRL.NET
That's possible, but a bad hack. Would advise against. On Mon, Feb 5, 2018 at 8:13 PM, Nate Hardman <nhardman1428@gmail.com> wrote:
Mulled this over also. You could do a little editing and have second copy of Allmon in a second directory and have separate commands list in the controlpanel.ini.php and different nodes listed in allmon.ini.php. I've been playing with it since you posted the question. Seems to be working. Unless Tim knows of something in the code that would be problematic.
On Mon, Feb 5, 2018 at 10:50 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
Sorry to say that is not in Allmon at this time. It's great idea and something I'd like to do.
On Mon, Feb 5, 2018 at 6:47 AM, Jeffrey Lehman, KC8QCH <kc8qch@gmail.com> wrote:
Hello all,
Is it possible to setup individual users and restrict access for those users from functions in Allmon? For example, say I want to set up a user that can only connect and disconnect a node from the Allmon interface, but I don't want them to have access to the Control panel? Or I want them to have access to certain functions in the control panel? From what I have been able to find, I don't think it is possible, but I wanted to ask in case I missed something or someone had found a solution.
Thanks much!
Jeff, KC8QCH
-- Jeff Lehman, KC8QCH https://kc8qch.ddns.net kc8qch@gmail.com
Webmaster Hamilton Couny ARPSC https://www.hamcoarpsc.org hamcoarpsc@gmail.com
AllStar 47374 Node Administrator World Wide Amateur Radio Guild https://theguildglobal.org
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
Nathan Hardman nhardman1428@gmail.com N8THN@ARRL.NET
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
Added request to my gitHub... https://github.com/tsawyer/allmon2/issues/8 On Mon, Feb 5, 2018 at 7:50 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
Sorry to say that is not in Allmon at this time. It's great idea and something I'd like to do.
On Mon, Feb 5, 2018 at 6:47 AM, Jeffrey Lehman, KC8QCH <kc8qch@gmail.com> wrote:
Hello all,
Is it possible to setup individual users and restrict access for those users from functions in Allmon? For example, say I want to set up a user that can only connect and disconnect a node from the Allmon interface, but I don't want them to have access to the Control panel? Or I want them to have access to certain functions in the control panel? From what I have been able to find, I don't think it is possible, but I wanted to ask in case I missed something or someone had found a solution.
Thanks much!
Jeff, KC8QCH
-- Jeff Lehman, KC8QCH https://kc8qch.ddns.net kc8qch@gmail.com
Webmaster Hamilton Couny ARPSC https://www.hamcoarpsc.org hamcoarpsc@gmail.com
AllStar 47374 Node Administrator World Wide Amateur Radio Guild https://theguildglobal.org
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
-- Tim WD6AWP
participants (3)
-
Jeffrey Lehman, KC8QCH -
Nate Hardman -
Tim Sawyer