The repeater site I will be installing allstar node on is part of a club that they want to people to pay a small yearly fee to use their services. Although I am for setting up a free system, they insist that I have some secret DTMF codes instead of the default for the system. The codes I want to change: *3 <node you want to connect to > *1 <node you want to dissconnect to> *71 <dissconnect all> *33 <Echolink node you want to connet to> I want to change the disconnect all to plain *73, *no stars or nothing if that is possible I would like to change the connect to <allstar node> to a *Number *then a ** *for example 4* <allstar to connect to> (I would like to tell yaal the exact number before the star but I don't want to get in trouble) I would like to do similar to above for Echolink and Dissconnect the specific node. Is that all possible and will it work fine? Im still a newbie so could I have help on changing it? -- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
Someone can correct me if I’m wrong, but this would be contrary to All Star Link node guidelines. The idea is that some codes should be available for anyone to use, say visitors for example, to connect back to their home node. Of course, you can use Asterisk and set up a system that isn’t linked to All Star, but I believe that if you have an All Star node number, you kinda have to use at least some standard codes, like connect/disconnect, though certainly not control codes. Someone tell me if I’m talking out of school. On Jul 1, 2014, at 6:40 PM, Skyler F <electricity440@gmail.com> wrote:
The repeater site I will be installing allstar node on is part of a club that they want to people to pay a small yearly fee to use their services. Although I am for setting up a free system, they insist that I have some secret DTMF codes instead of the default for the system.
The codes I want to change:
*3 <node you want to connect to >
*1 <node you want to dissconnect to>
*71 <dissconnect all>
*33 <Echolink node you want to connet to>
I want to change the disconnect all to plain 73, no stars or nothing if that is possible
I would like to change the connect to <allstar node> to a Number then a * for example 4* <allstar to connect to> (I would like to tell yaal the exact number before the star but I don't want to get in trouble)
I would like to do similar to above for Echolink and Dissconnect the specific node.
Is that all possible and will it work fine?
Im still a newbie so could I have help on changing it?
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The repeater is to be open by all users.. Read the first page on the www.allstarlink.org site. The repeater has to be publicly-accessible. It Reads "*We organize and administrate a network of publicly-accessible (license required) Amateur Radio repeater and remote base stations accessible to each other via Voice over IP on the Internet.* *Our Administrative and Web presence and methodology has been completely re-vamped and vastly improved.* *The implementation of this system and its monthly upkeep is very costly. I, Jim Dixon, WB6NIL personally bear this cost (along with several generous donations of server space/bandwith from others). Any monetary help that you can and wish to give will be much appreciated. A PayPal donation button is provided below if you wish to do so. Thanks, I very much appreciate it.."* On Tue, Jul 1, 2014 at 3:47 PM, Buddy Brannan <buddy@brannan.name> wrote:
Someone can correct me if I’m wrong, but this would be contrary to All Star Link node guidelines. The idea is that some codes should be available for anyone to use, say visitors for example, to connect back to their home node. Of course, you can use Asterisk and set up a system that isn’t linked to All Star, but I believe that if you have an All Star node number, you kinda have to use at least some standard codes, like connect/disconnect, though certainly not control codes. Someone tell me if I’m talking out of school.
On Jul 1, 2014, at 6:40 PM, Skyler F <electricity440@gmail.com> wrote:
The repeater site I will be installing allstar node on is part of a club that they want to people to pay a small yearly fee to use their services. Although I am for setting up a free system, they insist that I have some secret DTMF codes instead of the default for the system.
The codes I want to change:
*3 <node you want to connect to >
*1 <node you want to dissconnect to>
*71 <dissconnect all>
*33 <Echolink node you want to connet to>
I want to change the disconnect all to plain *73, *no stars or nothing if that is possible
I would like to change the connect to <allstar node> to a *Number *then a ** *for example 4* <allstar to connect to> (I would like to tell yaal the exact number before the star but I don't want to get in trouble)
I would like to do similar to above for Echolink and Dissconnect the specific node.
Is that all possible and will it work fine?
Im still a newbie so could I have help on changing it?
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks guys. I hope the Rocky Mountain Radio League still allows it. Its my system I am installing for *them* as a donation to the club after all :-) I think they just want reasons for people to join the club cuz nowadays the population is diminishing. DTMF is not that hard to decode anyways. I have a bunch of friends that can do it by ear and found club codes on other repeaters. And theres those iPhone apps. Maybe I will have it say "Please Support the Club by Joining" as a voice announcement. 73's KDØWHB On Tue, Jul 1, 2014 at 5:02 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
The repeater is to be open by all users.. Read the first page on the www.allstarlink.org site. The repeater has to be publicly-accessible.
It Reads "*We organize and administrate a network of publicly-accessible (license required) Amateur Radio repeater and remote base stations accessible to each other via Voice over IP on the Internet.*
*Our Administrative and Web presence and methodology has been completely re-vamped and vastly improved.*
*The implementation of this system and its monthly upkeep is very costly. I, Jim Dixon, WB6NIL personally bear this cost (along with several generous donations of server space/bandwith from others). Any monetary help that you can and wish to give will be much appreciated. A PayPal donation button is provided below if you wish to do so. Thanks, I very much appreciate it.."*
On Tue, Jul 1, 2014 at 3:47 PM, Buddy Brannan <buddy@brannan.name> wrote:
Someone can correct me if I’m wrong, but this would be contrary to All Star Link node guidelines. The idea is that some codes should be available for anyone to use, say visitors for example, to connect back to their home node. Of course, you can use Asterisk and set up a system that isn’t linked to All Star, but I believe that if you have an All Star node number, you kinda have to use at least some standard codes, like connect/disconnect, though certainly not control codes. Someone tell me if I’m talking out of school.
On Jul 1, 2014, at 6:40 PM, Skyler F <electricity440@gmail.com> wrote:
The repeater site I will be installing allstar node on is part of a club that they want to people to pay a small yearly fee to use their services. Although I am for setting up a free system, they insist that I have some secret DTMF codes instead of the default for the system.
The codes I want to change:
*3 <node you want to connect to >
*1 <node you want to dissconnect to>
*71 <dissconnect all>
*33 <Echolink node you want to connet to>
I want to change the disconnect all to plain *73, *no stars or nothing if that is possible
I would like to change the connect to <allstar node> to a *Number *then a ** *for example 4* <allstar to connect to> (I would like to tell yaal the exact number before the star but I don't want to get in trouble)
I would like to do similar to above for Echolink and Dissconnect the specific node.
Is that all possible and will it work fine?
Im still a newbie so could I have help on changing it?
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
participants (3)
-
Buddy Brannan -
David KE6UPI -
Skyler F