Hi Birton, What image are you using? After downloading the image and unzip'ing the image, what is the md5sum (use Linux utility "md54um <imagename>" It's possible that you are getting a truncation of the file. Here is the latest md5um of BBB image that I downloaded: md5sum BBB_Allstar_1.2.1.img 99351fca14d84c608be6420d556e967d BBB_Allstar_1.2.1.img md5sum BBB_Allstar_v1.2.1.zip 7757d3ad29ee4635698d91c2dc4285ac BBB_Allstar_v1.2.1.zip For Linux systems in creating the image, I unzip the image and use the dd command (as root) as follows: unzip BBB_Allstar_v1.2.1.zip dd if=BBB_Allstar_1.2.1.img of=/dev/sdh bs=1M note: the device in the above example is the one my system recognizes for the sd card. Also, if you are creating the image on a Linux system, you can check the image in a couple of ways... Once the image is created, remove and re-insert the sd-card. Determine the device that the sd-card is being recognized. In my case, it's the "/dev/sdh" device. You can then check the partitions: fsck -C -f /dev/sdh1 (fat file system) fsck -C -f /dev/sdh2 (ext4 file system) Also note, some Linux distributions will automatically mount the sd-card. You will need to umount the file system prior to running file check (fsck). I suspect that the image may be corrupt. 73, Happy Holidays, Chris, w0anm On Wed, Dec 23, 2015 at 12:36 PM, Birton <buck@thebghouse.org> wrote:

Hi,

Using these instructions, I’ve tried to reload my BBB with the new version.

http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/#image

Hardware: BBB Rev C

SDCARD: 8bg

Actions:

1. Burned the img to 2 different cards (including the one I’m running) using Win32Imager

2. Burned the img to 2 different cards (including the one I’m running) using linux dd

Result:

1. Blue Power Light on

2. NO Other Blue Light Activity

3. NO Boot

4. Nothing on HDMI Display

Fall back: Re-Burned the original image to same card and system back running.

Suggestions?

Birton, N6UG

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.