Sorry Ron I have been every busy. This is from a post sometime ago. 921=cop,61,GPIO1=1 ; Turn on GPIO 1 920=cop,61,GPIO1=0 ; Turn off GPIO 1 This should give you some idea. Search the email post for "GPIO" David On Tue, Mar 27, 2012 at 4:22 PM, Ron Simpson <n6gkj.cm98@yahoo.com> wrote:

Hey Guys!,

I am looking to use the Parallel Port to control some hardware funtions on my node, I am using the Quad PCi card, I am looking for the command string to do this. Has anyone done this with a Quad Card and maybe point me in the right direction?

Thanks!!

Ron Simpson, N6GKJ Amateur Radio ...................

Have you ever noticed that when you are looking for something, it is always found in the last place you look?

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

you've got to be kidding :-). JIM Date: Tue, 27 Mar 2012 16:22:37 -0700 From: n6gkj.cm98@yahoo.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Parallel Port manipulation when using Quad PCI Card Hey Guys!, I am looking to use the Parallel Port to control some hardware funtions on my node, I am using the Quad PCi card, I am looking for the command string to do this. Has anyone done this with a Quad Card and maybe point me in the right direction? Thanks!! Ron Simpson, N6GKJ Amateur Radio ................... Have you ever noticed that when you are looking for something, it is always found in the last place you look? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users