Morning all! I'm trying to setup Zopier to use my iOS devices with my allstar node. I use iaxrpt with much success on Windows. I was able to get the Zopier configured to successfully register, but how do you actually "use" it to connect, be able to transmit, etc? Seems litl you have to dial something to make it "call"? Any help is appreciated!Thanks! TomW9SRV
Tom, It would be the same for any VOIP app. You must have 'PHONE CONTROL' commands set-up in rpt.conf So, if you have the proper set-up in extensions.conf, and after initial log-in to the server, you would first connect to the node# by dialing the node#. Then use the phone control commands from your command list. See wiki. ...mike/kb8jnm On 4/7/2019 12:22 PM, TGundo 2003 wrote:
Morning all!
I'm trying to setup Zopier to use my iOS devices with my allstar node. I use iaxrpt with much success on Windows. I was able to get the Zopier configured to successfully register, but how do you actually "use" it to connect, be able to transmit, etc? Seems litl you have to dial something to make it "call"?
Any help is appreciated! Thanks!
Tom W9SRV
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks Mike- I didn't realize to dial the node number, iaxrpt does that when you hit connect. Got it working great, the iPhone sounds really good thru the system. TomW9SRV On Sunday, April 7, 2019, 1:42:36 PM CDT, Mike <mm@midnighteng.com> wrote: Tom, It would be the same for any VOIP app. You must have 'PHONE CONTROL' commands set-up in rpt.conf So, if you have the proper set-up in extensions.conf, and after initial log-in to the server, you would first connect to the node# by dialing the node#. Then use the phone control commands from your command list. See wiki. ...mike/kb8jnm On 4/7/2019 12:22 PM, TGundo 2003 wrote: Morning all! I'm trying to setup Zopier to use my iOS devices with my allstar node. I use iaxrpt with much success on Windows. I was able to get the Zopier configured to successfully register, but how do you actually "use" it to connect, be able to transmit, etc? Seems litl you have to dial something to make it "call"? Any help is appreciated! Thanks! Tom W9SRV _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
Mike -
TGundo 2003