If the two nodes are on the same network you should put the address of the other in each nodes stanza of rpt.conf. Like so node 29477: [nodes] 29477 = radio@127.0.0.1/29477,NONE 29451 = radio@192.168.1.10:4568/29451,NONE node 29451: [nodes] 29451 = radio@127.0.0.1:4568/29451,NONE 29477 = radio@192.168.1.9/29477,NONE If your nodes are on different public ip address you can code in the address as above but it shouldn’t be necessary as that’s the whole point of the Allstar directory services. If on public IP’s check /var/lib/asterisk/rpt_extnodes on both systems for both nodes numbers with the correct IP and port. -- Tim :wq On Dec 8, 2013, at 11:10 AM, Chris Day <kb1rxa@gmail.com> wrote:

Nope will not work 29477 to 29451 ...strange

On Sun, Dec 8, 2013 at 2:09 PM, Chris Day <kb1rxa@gmail.com> wrote: Hi Tim,

I am dialing in from 29477 my remote node... I did see you connect and called.. hold on let me try again

Chris

On Sun, Dec 8, 2013 at 2:00 PM, Tim Sawyer <tim.sawyer@mac.com> wrote: I just connected to you fine. How are you testing it? -- Tim :wq

On Dec 8, 2013, at 10:43 AM, Chris Day <kb1rxa@gmail.com> wrote:

...

Correction to my signature earlier - nodes are 29477 and 29451 --------------------------------------------------------------------------------------------------------------- NODE 29451

does not accept inbound Allstar connections

Router configured correctly to forward 4569 UDP to Allstar box internal IP

Router is working with Echolink and DSTAR and working Echolink (both ways) through 29451

No port conflicts

This is my second Allstar node; other is on a tower at a remote sight, so this problem is local only

Wonder if this may be one of the cases described here: http://ohnosec.org/drupal/node/66

Befuddled

KB1RXA 29477, 29451 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users