I managed to steer to any of the 40 GM300 channels with AllStar link and custom scripts. I am going to deploy this 40 channel VHF remote and a 20 channel UHF on a mountaintop with a wireless internet service provider. Binary select only lets me get to 16 channels, so my method controls the front panel directly. It's been a pretty fun project, but it has been a pain messing with the event handler in Allstar to get everything to work properly. Due to limitations, I had to set up the base as a standard node and write customizations for user log in to enable the transmitter. Here is the video https://youtu.be/ZY9pfy5F4hw 73 Skyler KDØWHB
Skyler, very well done. tnx Mike / W5JR Alpharetta GA
On Jun 22, 2016, at 12:03 PM, Skyler Fennell <electricity440@gmail.com> wrote:
I managed to steer to any of the 40 GM300 channels with AllStar link and custom scripts. I am going to deploy this 40 channel VHF remote and a 20 channel UHF on a mountaintop with a wireless internet service provider.
Binary select only lets me get to 16 channels, so my method controls the front panel directly.
It's been a pretty fun project, but it has been a pain messing with the event handler in Allstar to get everything to work properly. Due to limitations, I had to set up the base as a standard node and write customizations for user log in to enable the transmitter.
Here is the video
73 Skyler KDØWHB _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
Mike - W5JR -
Skyler Fennell