On 06/04/2014 07:17 AM, mike@midnighteng.com wrote:

Tom,

Just 2 thoughts on this,

You might look at the error log on the OS install for drivers that did not load/download.(I think the chipset is much newer than the os install) Possible manual install for chipset drivers?

You might also try to install again with a usb sound dongle installed from the beginning.

Let me know what you find if anything.

...mike/kb8jnm

Have a friend that tried the NUC on acid... no joy. at least with Acid, using usbradio as the channel driver. simpleusb might be different, but that depends on your setup. Personally, I would use anything that didn't power/support the DSP options in the usbradio channel driver. --- 73 = Best Regard"S" -Geoff/W5OMR