Don, In both the case of bringing in the monitor receiver, voting and separate TX/RX USB adapters, I've wanted to do the same. For the separate TX/RX USB adapters, it would be great if you use transceivers to build a repeater because you could then monitor the output frequency at the site (assuming no circulators in the TX path). I'm going to put them on the feature list and see if someone will take on this functionality or at some point do it myself. 73, Steve H. On Tue, May 27, 2008 at 5:13 AM, Don Russell <w9drr@live.com> wrote:

While working with the weather receiver, I just thought about voting receivers.

Is there any logic with app_rpt to define fobs as separate receivers not having to "link" them in. The fob I am using is hooked to a receiver only. Is there any way this can be done with making the controller go into "linked" state, when really its not linked to any external nodes. It is just connected local ones, that are never dropped. that is partially OK, but when you use the courtesy tones to determine linked/unlinked state they are useless because it considers itself linked, when its not really linked to any external nodes. That also bring up "leaked" audio. If I am linked to another system, my local weather receiver audio will leak out when it should stay local. How can I stop that?

That brings me to project #3 Voting separate fobs: I am planning on adding in a separate rf linked receiver. Is there a way to define a fob as a "receiver" and another as a "transmitter". Also is there any voting based on S/N possible? I want to do everything with asterisk, not external voters.

Don W9DRR

------------------------------ Give to a good cause with every e-mail. Join the i'm Initiative from Microsoft.<http://im.live.com/Messenger/IM/Join/Default.aspx?souce=EML_WL_+GoodCause>

_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt