I'm trying to figure out how to configure app_rpt to use the Santiago Board between an existing controller and repeater. Should duplex=1 in rpt.conf ? as for usbradio.conf only the following underlined are needed ?? *hdwtype=0 rxboost=1 *txboost=1 *rxctcssrelax=1 *txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 ;rxctcssoverride=0 carrierfrom=vox ctcssfrom=no rxdemod=speaker txprelim=no txlimonly=no txtoctype=no *txmixa=composite* txmixb=no *invertptt=0 duplex=0 *rxondelay=0 rxnoisefiltype=0 *eeprom=0*