I was wondering if there is a way to get DTMF to pass on the local node/repeater and if not is it something that could be easily added? An ideal thing would be have a key that would unmute pass the tones like #1234 so 1245 would be passed One other thing that I am looking for has anyone done anything with the Parallel port as an input. What I would like to do is when the site is running on generator I have a logic line that goes high and would like the repeater to say a message like every 15 minutes while the generator is running? Thanks -- Randy KB3HJC <http://kb3hjc.net>
If you add this in rpt.conf the node will pass dtmf propagate_dtmf = yes Neal Ng8y Sent from my iPhone On Aug 27, 2011, at 5:59 PM, Randy Ballard <kb3hjc@gmail.com> wrote:
I was wondering if there is a way to get DTMF to pass on the local node/repeater and if not is it something that could be easily added? An ideal thing would be have a key that would unmute pass the tones like #1234 so 1245 would be passed
One other thing that I am looking for has anyone done anything with the Parallel port as an input. What I would like to do is when the site is running on generator I have a logic line that goes high and would like the repeater to say a message like every 15 minutes while the generator is running?
Thanks
-- Randy KB3HJC
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
On Sun, 28 Aug 2011 06:59:06 Randy Ballard wrote: <snip>
One other thing that I am looking for has anyone done anything with the Parallel port as an input. What I would like to do is when the site is running on generator I have a logic line that goes high and would like the repeater to say a message like every 15 minutes while the generator is running?
Have you looked at NUT? http://www.networkupstools.org/ NUT is an existing set of tools for monitoring UPS and backup power supplies, with a mechanism for distributing the status to client apps. Can you hook your generator up to a serial port (it seems that NUT monitors a serial line) and then get app_rpt to poll NUT status? 73, Andrew
participants (3)
-
Andrew Errington -
Neal Garbenis -
Randy Ballard