lox, beagle, and pickles...
Hey everyone, I wanted to start fiddling with a beagle board, get a lox board, and can easily find those, but the pickle linux seems to not be available. Anyone know of a working source for those? GeorgeC George J Csahanin W2DB Cedar Park, TX 512-401-2630 401-338-0568 cel
There's a link on the front page of www.allstarlink.org. Also on the piconode site : http://piconode.org/piconode/ -- Robert A. Poff Loganville, PA WB3AWJ - Allstar 27784 Powered by Linux On Fri, 2012-05-04 at 00:55 -0500, George Csahanin wrote:
Hey everyone, I wanted to start fiddling with a beagle board, get a lox board, and can easily find those, but the pickle linux seems to not be available. Anyone know of a working source for those?
GeorgeC
George J Csahanin W2DB Cedar Park, TX 512-401-2630 401-338-0568 cel
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Link does not work. Neither does the alternate http://picklejar.org. The site seems to have a lot of downtime. Once it does come back online, though, it's a simple download to get Pickle Linux. The availability of the BeagleBoard may be a problem, however. Looks like none of the suppliers have them in stock and there is a fairly long lead time. Brett KQ9N On Fri, May 4, 2012 at 5:57 AM, Robert Poff <wb3awj@comcast.net> wrote:
** There's a link on the front page of www.allstarlink.org. Also on the piconode site : http://piconode.org/piconode/
-- *Robert A. Poff* *Loganville, PA*
WB3AWJ* - Allstar 27784* *Powered by Linux*
Hi all, I have 3 nodes connected to me, and its hard to tell which user is coming from what repeater becuase all the courtesy tone sound the same. Is there a way to provide costume CT for each connected node? or is there a way to pass the CT over the link? Thanks, --Sione KE6STH
No, there no way to do that, at least not that I know. But you might want to check out cop 25, cop 25 and ilink 7. If the cop and ilink commands are something unfamiliar I'd be happy to elaborate. -- Tim :wq On May 7, 2012, at 9:49 AM, Sione Ragle wrote:
Hi all, I have 3 nodes connected to me, and its hard to tell which user is coming from what repeater becuase all the courtesy tone sound the same. Is there a way to provide costume CT for each connected node? or is there a way to pass the CT over the link?
Thanks, --Sione KE6STH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I just looked it up. COP 25 = Query last node un-keyed ilink 7 = Last Node to Key Up not sure how I can make those cmds execute a CT each time someone unkeys. On 5/7/2012 1:23 PM, Tim Sawyer wrote:
No, there no way to do that, at least not that I know. But you might want to check out cop 25, cop 25 and ilink 7. If the cop and ilink commands are something unfamiliar I'd be happy to elaborate. -- Tim :wq
On May 7, 2012, at 9:49 AM, Sione Ragle wrote:
Hi all, I have 3 nodes connected to me, and its hard to tell which user is coming from what repeater becuase all the courtesy tone sound the same. Is there a way to provide costume CT for each connected node? or is there a way to pass the CT over the link?
Thanks, --Sione KE6STH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Maybe with the event management system. http://ohnosec.org/drupal/node/176 -- Tim :wq On May 7, 2012, at 1:33 PM, Sione Ragle wrote:
I just looked it up.
COP 25 = Query last node un-keyed ilink 7 = Last Node to Key Up
not sure how I can make those cmds execute a CT each time someone unkeys.
On 5/7/2012 1:23 PM, Tim Sawyer wrote:
No, there no way to do that, at least not that I know. But you might want to check out cop 25, cop 25 and ilink 7. If the cop and ilink commands are something unfamiliar I'd be happy to elaborate. -- Tim :wq
On May 7, 2012, at 9:49 AM, Sione Ragle wrote:
Hi all, I have 3 nodes connected to me, and its hard to tell which user is coming from what repeater becuase all the courtesy tone sound the same. Is there a way to provide costume CT for each connected node? or is there a way to pass the CT over the link?
Thanks, --Sione KE6STH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Now that looks more like what I need, now I just need to understand how that works, and have it execute ether a CT or sound file on a matching node number that unkeys. Reading that doc sorta went over my head. On 5/7/2012 1:55 PM, Tim Sawyer wrote:
Maybe with the event management system. http://ohnosec.org/drupal/node/176
-- Tim :wq
On May 7, 2012, at 1:33 PM, Sione Ragle wrote:
I just looked it up.
COP 25 = Query last node un-keyed ilink 7 = Last Node to Key Up
not sure how I can make those cmds execute a CT each time someone unkeys.
On 5/7/2012 1:23 PM, Tim Sawyer wrote:
No, there no way to do that, at least not that I know. But you might want to check out cop 25, cop 25 and ilink 7. If the cop and ilink commands are something unfamiliar I'd be happy to elaborate. -- Tim :wq
On May 7, 2012, at 9:49 AM, Sione Ragle wrote:
Hi all, I have 3 nodes connected to me, and its hard to tell which user is coming from what repeater becuase all the courtesy tone sound the same. Is there a way to provide costume CT for each connected node? or is there a way to pass the CT over the link?
Thanks, --Sione KE6STH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (5)
-
Brett Friermood -
George Csahanin -
Robert Poff -
Sione Ragle -
Tim Sawyer