Group, I recently updated my SVN to the latest on my HUB node. It was no older than 6 months. Anyway, I monitor the status of the hub via the CLI. I was able to tell what nodes are connecting and got updates about once a few minutes that the EchoLink db was updated. After the update, I do not see anything from EchoLink in the CLI. I know it working as I can connect. When I do connect, it no longer shows the callsign of who is connecting. Is there any more info on some CLI commands for echolink. I set the debug level to 7 but I get nothing more. -- boB - W5EVH
try using the verbose option: asterisk -rvvv -- Tim :wq On Jun 4, 2012, at 9:38 PM, Bob Roszkowski wrote:
Group, I recently updated my SVN to the latest on my HUB node. It was no older than 6 months. Anyway, I monitor the status of the hub via the CLI. I was able to tell what nodes are connecting and got updates about once a few minutes that the EchoLink db was updated. After the update, I do not see anything from EchoLink in the CLI. I know it working as I can connect. When I do connect, it no longer shows the callsign of who is connecting. Is there any more info on some CLI commands for echolink. I set the debug level to 7 but I get nothing more.
-- boB - W5EVH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Bob Roszkowski -
Tim Sawyer