Re: [App_rpt] Recording repeater audio
Rodger, The 'locate' command can be used to find it. It's in /usr/src/EVB/ast_base/asterisk-1.4.21.2/configs/rpt.conf.sample You're right that we should make an obvious link to it in the web based documentation 73, Steve On Sat, Oct 4, 2008 at 8:46 AM, Roger F. Jordan Sr. <w4rfj@comcast.net> wrote:
Hey Steve,
I did not find rpt.conf.sample in the /etc/asterisk directory of the network install... We could make it available in the XIPAR downloads...
VR Roger W4RFJ Xipar Application Engineer Extraordinaire
-----Original Message----- From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of Steven Henke Sent: Thursday, October 02, 2008 5:52 PM To: Asterisk Repeater Controler Subject: Re: [App_rpt] Recording repeater audio
It's already in there. Check out the rpt.conf sample file... 73, Steve W9SH
On Thu, Oct 2, 2008 at 3:57 PM, Matt Beasant <g4rky@yahoo.co.uk> wrote:
Hi everyone,
Does anyone know a way of recording the traffic (audio) in / out of the node and saving it as a file ( MP3 or whatever ) on the node hard drive?
Something along the lines of Scanrec, which is a windows application with built in Vox and timestamps, would be ideal but I wanted to avoid having another machine involved.
Anyone any ideas or thoughts on how this could be done - I should add that I'm a complete newbie!
Thanks in advance for any replies.
73,
Matt G4RKY _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Thanks to everyone who replied. I've found it now and it works a treat! Are there any other options I can use with that command, for example, to change to MP3 format or something? If not, no problem - its working well and seems to require about 8Kb / sec of disc space, which equates to almost 700 hours for a 20Gb partition.. Cool! Thanks, Matt G4RKY 2008/10/4 Steven Henke <steve.w9sh@gmail.com>
Rodger,
The 'locate' command can be used to find it. It's in /usr/src/EVB/ast_base/asterisk-1.4.21.2/configs/rpt.conf.sample You're right that we should make an obvious link to it in the web based documentation
73,
Steve
On Sat, Oct 4, 2008 at 8:46 AM, Roger F. Jordan Sr. <w4rfj@comcast.net> wrote:
Hey Steve,
I did not find rpt.conf.sample in the /etc/asterisk directory of the network install... We could make it available in the XIPAR downloads...
VR Roger W4RFJ Xipar Application Engineer Extraordinaire
-----Original Message----- From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of Steven Henke Sent: Thursday, October 02, 2008 5:52 PM To: Asterisk Repeater Controler Subject: Re: [App_rpt] Recording repeater audio
It's already in there. Check out the rpt.conf sample file... 73, Steve W9SH
On Thu, Oct 2, 2008 at 3:57 PM, Matt Beasant <g4rky@yahoo.co.uk> wrote:
Hi everyone,
Does anyone know a way of recording the traffic (audio) in / out of the node and saving it as a file ( MP3 or whatever ) on the node hard drive?
Something along the lines of Scanrec, which is a windows application with built in Vox and timestamps, would be ideal but I wanted to avoid having another machine involved.
Anyone any ideas or thoughts on how this could be done - I should add that I'm a complete newbie!
Thanks in advance for any replies.
73,
Matt G4RKY _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
convert to MP3 in real time on a telecom system? Surely you jest :-). The cpu time required for that (especially on smaller systems) would be MOST prohibitive. Therefore, its *really* designed to have a queue of native format messages (and log files, also) get copied to a larger server on a periodic basis and let the large server with big CPU's handle the MP3 crunching. Date: Sat, 4 Oct 2008 22:10:11 +0100 From: g4rky@yahoo.co.uk To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] Recording repeater audio Thanks to everyone who replied. I've found it now and it works a treat! Are there any other options I can use with that command, for example, to change to MP3 format or something? If not, no problem - its working well and seems to require about 8Kb / sec of disc space, which equates to almost 700 hours for a 20Gb partition.. Cool! Thanks, Matt G4RKY 2008/10/4 Steven Henke <steve.w9sh@gmail.com> Rodger, The 'locate' command can be used to find it. It's in /usr/src/EVB/ast_base/asterisk-1.4.21.2/configs/rpt.conf.sample You're right that we should make an obvious link to it in the web based documentation 73, Steve On Sat, Oct 4, 2008 at 8:46 AM, Roger F. Jordan Sr. <w4rfj@comcast.net> wrote:
Hey Steve,
I did not find rpt.conf.sample in the /etc/asterisk directory of the
network install... We could make it available in the XIPAR downloads...
VR Roger W4RFJ Xipar Application Engineer Extraordinaire
-----Original Message-----
From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of Steven Henke
Sent: Thursday, October 02, 2008 5:52 PM To: Asterisk Repeater Controler Subject: Re: [App_rpt] Recording repeater audio
It's already in there. Check out the rpt.conf sample file... 73, Steve W9SH
On Thu, Oct 2, 2008 at 3:57 PM, Matt Beasant <g4rky@yahoo.co.uk> wrote:
Hi everyone,
Does anyone know a way of recording the traffic (audio) in / out of the node and saving it as a file ( MP3 or whatever ) on the node hard drive?
Something along the lines of Scanrec, which is a windows application with
built in Vox and timestamps, would be ideal but I wanted to avoid having another machine involved.
Anyone any ideas or thoughts on how this could be done - I should add that
I'm a complete newbie!
Thanks in advance for any replies.
73,
Matt G4RKY _______________________________________________
App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Ah, yeah, you're right Jim. Didnt think of that one! My excuse, its getting late here in England ;-) As it is, I'm just happy its there for me and working great. Its a steep learning curve for me but the more I learn about Allstar / appRpt the more I like it. Cheers guys, Matt 2008/10/4 Jim Duuuude <telesistant@hotmail.com>
convert to MP3 in real time on a telecom system? Surely you jest :-). The cpu time required for that (especially on smaller systems) would be MOST prohibitive. Therefore, its *really* designed to have a queue of native format messages (and log files, also) get copied to a larger server on a periodic basis and let the large server with big CPU's handle the MP3 crunching.
------------------------------ Date: Sat, 4 Oct 2008 22:10:11 +0100 From: g4rky@yahoo.co.uk To: app_rpt@lists.illiana.net
Subject: Re: [App_rpt] Recording repeater audio
Thanks to everyone who replied.
I've found it now and it works a treat!
Are there any other options I can use with that command, for example, to change to MP3 format or something?
If not, no problem - its working well and seems to require about 8Kb / sec of disc space, which equates to almost 700 hours for a 20Gb partition..
Cool! Thanks,
Matt G4RKY
2008/10/4 Steven Henke <steve.w9sh@gmail.com>
Rodger,
The 'locate' command can be used to find it. It's in /usr/src/EVB/ast_base/asterisk-1.4.21.2/configs/rpt.conf.sample You're right that we should make an obvious link to it in the web based documentation
73,
Steve
On Sat, Oct 4, 2008 at 8:46 AM, Roger F. Jordan Sr. <w4rfj@comcast.net> wrote:
Hey Steve,
I did not find rpt.conf.sample in the /etc/asterisk directory of the network install... We could make it available in the XIPAR downloads...
VR Roger W4RFJ Xipar Application Engineer Extraordinaire
-----Original Message----- From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of Steven Henke Sent: Thursday, October 02, 2008 5:52 PM To: Asterisk Repeater Controler Subject: Re: [App_rpt] Recording repeater audio
It's already in there. Check out the rpt.conf sample file... 73, Steve W9SH
On Thu, Oct 2, 2008 at 3:57 PM, Matt Beasant <g4rky@yahoo.co.uk> wrote:
Hi everyone,
Does anyone know a way of recording the traffic (audio) in / out of the node and saving it as a file ( MP3 or whatever ) on the node hard drive?
Something along the lines of Scanrec, which is a windows application with built in Vox and timestamps, would be ideal but I wanted to avoid having another machine involved.
Anyone any ideas or thoughts on how this could be done - I should add that I'm a complete newbie!
Thanks in advance for any replies.
73,
Matt G4RKY _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Hey Jim, Ever the voice of controversy - I disagree with you. LAME encodes at faster than real-time on reasonable spec hardware (P3 2.4Ghz for example will do 2x 48Khz streams). For example, to capture directly from a sound device and write to MP3 natively you can use sox to do the I/O and pipe it to lame, as below. sox -t ossdsp -w -s -r 44100 -c 2 /dev/dsp -t raw - | lame -x -m s - .filename`date +%b%d_%H%M%P_%Y`.mp3 I don't know how "accessible" the raw commands are to app_rpt but it shouldn't be too tricky to do... 73 Jon G7PFT Jim Duuuude wrote:
convert to MP3 in real time on a telecom system? Surely you jest :-). The cpu time required for that (especially on smaller systems) would be MOST prohibitive. Therefore, its *really* designed to have a queue of native format messages (and log files, also) get copied to a larger server on a periodic basis and let the large server with big CPU's handle the MP3 crunching.
------------------------------------------------------------------------ Date: Sat, 4 Oct 2008 22:10:11 +0100 From: g4rky@yahoo.co.uk To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] Recording repeater audio
Thanks to everyone who replied.
I've found it now and it works a treat!
Are there any other options I can use with that command, for example, to change to MP3 format or something?
If not, no problem - its working well and seems to require about 8Kb / sec of disc space, which equates to almost 700 hours for a 20Gb partition..
Cool! Thanks,
Matt G4RKY
2008/10/4 Steven Henke <steve.w9sh@gmail.com <mailto:steve.w9sh@gmail.com>>
Rodger,
The 'locate' command can be used to find it. It's in /usr/src/EVB/ast_base/asterisk-1.4.21.2/configs/rpt.conf.sample You're right that we should make an obvious link to it in the web based documentation
73,
Steve
On Sat, Oct 4, 2008 at 8:46 AM, Roger F. Jordan Sr. <w4rfj@comcast.net <mailto:w4rfj@comcast.net>> wrote: > Hey Steve, > > I did not find rpt.conf.sample in the /etc/asterisk directory of the > network install... We could make it available in the XIPAR downloads... > > VR > Roger W4RFJ > Xipar Application Engineer Extraordinaire > > > -----Original Message----- > From: app_rpt-bounces@lists.illiana.net <mailto:app_rpt-bounces@lists.illiana.net> > [mailto:app_rpt-bounces@lists.illiana.net <mailto:app_rpt-bounces@lists.illiana.net>] On Behalf Of Steven Henke > Sent: Thursday, October 02, 2008 5:52 PM > To: Asterisk Repeater Controler > Subject: Re: [App_rpt] Recording repeater audio > > It's already in there. Check out the rpt.conf sample file... > 73, Steve W9SH > > > On Thu, Oct 2, 2008 at 3:57 PM, Matt Beasant <g4rky@yahoo.co.uk <mailto:g4rky@yahoo.co.uk>> wrote: >> Hi everyone, >> >> Does anyone know a way of recording the traffic (audio) in / out of the >> node and saving it as a file ( MP3 or whatever ) on the node hard drive? >> >> Something along the lines of Scanrec, which is a windows application with >> built in Vox and timestamps, would be ideal but I wanted to avoid having >> another machine involved. >> >> Anyone any ideas or thoughts on how this could be done - I should add that >> I'm a complete newbie! >> >> Thanks in advance for any replies. >> >> 73, >> >> Matt >> G4RKY >> _______________________________________________ >> App_rpt mailing list >> App_rpt@lists.illiana.net <mailto:App_rpt@lists.illiana.net> >> http://lists.illiana.net/mailman/listinfo/app_rpt >> >> > _______________________________________________ > App_rpt mailing list > App_rpt@lists.illiana.net <mailto:App_rpt@lists.illiana.net> > http://lists.illiana.net/mailman/listinfo/app_rpt > > _______________________________________________ > App_rpt mailing list > App_rpt@lists.illiana.net <mailto:App_rpt@lists.illiana.net> > http://lists.illiana.net/mailman/listinfo/app_rpt > _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net <mailto:App_rpt@lists.illiana.net> http://lists.illiana.net/mailman/listinfo/app_rpt
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Jon, I agree. In my experience, most any recent CPU has enough horsepower to easily keep up with real-time mp3 encoding.....Particularly if you aren't trying to encode "audiophile" quality mp3's! ....I haven't tried to get asterisk to do this, though. 73, David KB4FXC On Sun, 5 Oct 2008, Jon Richardson wrote:
Hey Jim,
Ever the voice of controversy - I disagree with you. LAME encodes at faster than real-time on reasonable spec hardware (P3 2.4Ghz for example will do 2x 48Khz streams). For example, to capture directly from a sound device and write to MP3 natively you can use sox to do the I/O and pipe it to lame, as below.
sox -t ossdsp -w -s -r 44100 -c 2 /dev/dsp -t raw - | lame -x -m s - .filename`date +%b%d_%H%M%P_%Y`.mp3
I don't know how "accessible" the raw commands are to app_rpt but it shouldn't be too tricky to do...
73 Jon G7PFT
Jim Duuuude wrote:
convert to MP3 in real time on a telecom system? Surely you jest :-). The cpu time required for that (especially on smaller systems) would be MOST prohibitive. Therefore, its *really* designed to have a queue of native format messages (and log files, also) get copied to a larger server on a periodic basis and let the large server with big CPU's handle the MP3 crunching.
------------------------------------------------------------------------ Date: Sat, 4 Oct 2008 22:10:11 +0100 From: g4rky@yahoo.co.uk To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] Recording repeater audio
Thanks to everyone who replied.
I've found it now and it works a treat!
Are there any other options I can use with that command, for example, to change to MP3 format or something?
If not, no problem - its working well and seems to require about 8Kb / sec of disc space, which equates to almost 700 hours for a 20Gb partition..
Cool! Thanks,
Matt G4RKY
2008/10/4 Steven Henke <steve.w9sh@gmail.com <mailto:steve.w9sh@gmail.com>>
Rodger,
The 'locate' command can be used to find it. It's in /usr/src/EVB/ast_base/asterisk-1.4.21.2/configs/rpt.conf.sample You're right that we should make an obvious link to it in the web based documentation
73,
Steve
On Sat, Oct 4, 2008 at 8:46 AM, Roger F. Jordan Sr. <w4rfj@comcast.net <mailto:w4rfj@comcast.net>> wrote: > Hey Steve, > > I did not find rpt.conf.sample in the /etc/asterisk directory of the > network install... We could make it available in the XIPAR downloads... > > VR > Roger W4RFJ > Xipar Application Engineer Extraordinaire > > > -----Original Message----- > From: app_rpt-bounces@lists.illiana.net <mailto:app_rpt-bounces@lists.illiana.net> > [mailto:app_rpt-bounces@lists.illiana.net <mailto:app_rpt-bounces@lists.illiana.net>] On Behalf Of Steven Henke > Sent: Thursday, October 02, 2008 5:52 PM > To: Asterisk Repeater Controler > Subject: Re: [App_rpt] Recording repeater audio > > It's already in there. Check out the rpt.conf sample file... > 73, Steve W9SH > > > On Thu, Oct 2, 2008 at 3:57 PM, Matt Beasant <g4rky@yahoo.co.uk <mailto:g4rky@yahoo.co.uk>> wrote: >> Hi everyone, >> >> Does anyone know a way of recording the traffic (audio) in / out of the >> node and saving it as a file ( MP3 or whatever ) on the node hard drive? >> >> Something along the lines of Scanrec, which is a windows application with >> built in Vox and timestamps, would be ideal but I wanted to avoid having >> another machine involved. >> >> Anyone any ideas or thoughts on how this could be done - I should add that >> I'm a complete newbie! >> >> Thanks in advance for any replies. >> >> 73, >> >> Matt >> G4RKY >> _______________________________________________ >> App_rpt mailing list >> App_rpt@lists.illiana.net <mailto:App_rpt@lists.illiana.net> >> http://lists.illiana.net/mailman/listinfo/app_rpt >> >> > _______________________________________________ > App_rpt mailing list > App_rpt@lists.illiana.net <mailto:App_rpt@lists.illiana.net> > http://lists.illiana.net/mailman/listinfo/app_rpt > > _______________________________________________ > App_rpt mailing list > App_rpt@lists.illiana.net <mailto:App_rpt@lists.illiana.net> > http://lists.illiana.net/mailman/listinfo/app_rpt > _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net <mailto:App_rpt@lists.illiana.net> http://lists.illiana.net/mailman/listinfo/app_rpt
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
participants (5)
-
David McGough -
Jim Duuuude -
Jon Richardson -
Matt Beasant -
Steven Henke