I have an asterisk pbx that I've maintained for the household for a few years now. I have a separate Allstar ACID install that I run interfaced to my URI. I've set up a IAX2 trunk between the two systems in hopes of being able to call the repeater from a household pbx extension in order to monitor or talk on the link. I've been able to call the repeater with the following extensions entry: [radio-secure] exten => 1234,1,rpt,27633|x but, it just keys the radio constantly and doesn't unkey unless I hang up. Is there a way to call in and monitor the link, and then key the transmitter if VOX is detected or better yet, if I press a digit on my phone to key and unkey the transmitter? Would be great to be able to bring up links, close links, etc from the phone's keypad as well. Thanks for any help. 73 Bobby KF4GTA
Of course I think I've figure it out after I posted to the listserv. Sorry for the extra message, but for anyone googling, check out the following flag: S - Simplex Dumb Phone Control mode. This allows a regular phone user\n" transmitter is toggled on and off when the phone user presses the\n" funcchar (*) key on the telephone set. In addition, the transmitter\n" will turn off if the endchar (#) key is pressed. When a user first\n" calls in, the transmitter will be off, and the user can listen for\n" radio traffic. When the user wants to transmit, they press the *\n" key, start talking, then press the * key again or the # key to turn\n" the transmitter off. No other functions can be executed by the\n" user on the phone when this mode is selected. Note: If your\n" radio system is full-duplex, we recommend using either P or D\n" modes as they provide more flexibility.\n"
participants (1)
-
Bobby Lacey