I am using app_rpt under Allstar, as I suspect many others are. I know I can connect to one or more nodes. What happens if A <-> B, B <-> C, and A <-> C? Would this cause some sort of loop, or is this handled at the IAX2 protocol level? In particular, I am wondering if it would create any sort of message storm, where the link-level app_rpt messages that are sent over the IAX2 connection would just be sent constantly... --Michael
app_rpt takes care of that (or at least *should*) Jmi
From: explorer@flame.org Date: Mon, 24 Sep 2012 15:47:45 -0500 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Loop prevention?
I am using app_rpt under Allstar, as I suspect many others are.
I know I can connect to one or more nodes. What happens if A <-> B, B <-> C, and A <-> C? Would this cause some sort of loop, or is this handled at the IAX2 protocol level?
In particular, I am wondering if it would create any sort of message storm, where the link-level app_rpt messages that are sent over the IAX2 connection would just be sent constantly...
--Michael
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Jim Duuuude -
Michael Graff