I think I was the culprit to cause the warning. I also have EVB V11 and Steve H. said something about adding the Chan_rtpDir to the Trunk. I tried to install rtpDir and was successful until I tried to add Chan_rtpdir to Asterisk. In my infinite wisdom I broke the asterisk install I had going. Steve is going to make Chan_rtpdir a part of the upgrade for EVB (I Hope). Roger W4RFJ _____ From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of James Nessen Sent: Sunday, August 03, 2008 1:05 AM To: Asterisk Repeater Controler Subject: Re: [App_rpt] chan_rtpdir warning for Xelatec Asterisk/EVB/app_rptsystems Hmm, any particular reason why we should avoid this? I have an EVB install that I was getting ready to update.. Jim / K6JWN On Sat, Aug 2, 2008 at 6:28 PM, Steven Henke <steve.w9sh@gmail.com> wrote: Hi All, I recommend that if you have a working Xelatec Asterisk/EVB/app_rpt system that you do not attempt to install chan_rtpdir. Please wait until the update script can install it for you. I'm working on that this weekend but no promises. If you can't wait, well, good luck! 73, Steve Henke, W9SH _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt