Hello; Looking for a little help again... I set up my new testing node on 27013. I get failed connects inbound but it does look like 27013 is registering correctly... outbound seems to work at least sometimes... If I recall correctly ( from last night.. I was sleepy) 27013 connects to 2235 but not to 2364, neither 2235 or 2364 can call in to 27013... Is there anything we are going to need to fix in extensions.conf or such to provide for the mask change of 4 chars to 5 chars in node name??? or is this some firewall issue again?? Both nodes I am testing with are registered but When connections come in that are not on port 4569... what do they come in on as a range??? maybe I need to forward those through my firewall?? I am using Untangle firewall and port forwarding from anything on the outside interface destined locally for port 4569 to pass through on 4569 to the inner specified host.... I am pretty sure you guys set up 2235 to only use 4569... this may have something to do with it.. In the big picture I Would rather fix the firewall to allow other ports through as needed than lock all to 4569.. but if that is what it takes ..ok :-) Maybe packets arrive on one port and I am forcing them internally throug NAT to 4569 and this is messing something up???? Thoughts???? ON a separate issue ( although it does include the same nodes as involved parties) 27013 is at a separate site from (2235 and 2364) .... both sites are behind a Similarly configured Untangle firewall... I also have 2 machines on 1 computer 2235 and 2364 and I can connect from 2235 to 2364 but not from 2364 to 2235... being both on localhost 127.0.0.1 it would seem to be an internal problem but scanning the 4 conf files I cannot see what.... both have registrations in iax.conf, extensions.conf and in rpt.conf.. both work individually but I am missing this... from extensions.conf [radio-secure] ;exten => ${NODE},1,rpt,${NODE} exten => 2235,1,Rpt,2235 exten => 2364,1,Rpt,2364 **************************** By the way.. are the "r" in rpt here case sensitive ??? I have seen listings both ways************** [radio-gui] exten => 2235,1,Rpt,2235|X exten => 2364,1,Rpt,2364|X from iax.conf register=A2235:xxxxxx@register.allstarlink.org register=A2364:xxxxxx@register.allstarlink.org ; Incoming radio connections [radio] type=user disallow=all allow=g726aal2 allow=gsm codecpriority=host context=radio-secure transfer=no from rpt.conf [nodes] ; Note, if you are using automatic update for allstar link nodes, ; no allstar link nodes should be defined here. Only place a definition ; for your locak nodes, and private (off of allstar link) nodes here. 2235 = radio@127.0.0.1/2235,NONE ; This must be changed to your node number 2364 = radio@127.0.0.1/2364,NONE ; Memories for remote bases and I have this in line after both node stanza's so it is duplicated twice.. statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates Any help????? Doug