On 7/4/2012 7:52 AM, Bob Roszkowski wrote: I have a node at a site along with a controller. I would like to access the controller via serial to update as needed. Is it possible to connect the AllStar nodes serial port to the controller and access it via SSH tunnel? I tried googleing it but could not find the answer I was looking for. What steps are required for setup? -- boB - W5EVH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users Take a look at minicom, it should work for what you are wanting to do. You can SSH into the box and then run minicom from there. If running ACID install it by issuing "yum install minicom" Hope that helps.... 73 Stephen K1LNX

Hi Bob: Sure is! - you can use a terminal program like MiniTerm. I set up a remote console for a friend that wanted to manage his SCOM 7330 via his app_rpt box. Cheers! Ramesh. www.freestar.us Sent on the TELUS Mobility network with BlackBerry -----Original Message----- From: Bob Roszkowski <bob@w5evh.org> Sender: app_rpt-users-bounces@ohnosec.org Date: Wed, 4 Jul 2012 06:52:45 To: <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Remote Serial Access _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users