Pierre, I have the exact same setup. You should have no issues but you'll have to run allstar half duplex. I tried FDX on the RC210 and the ASL node with pretty funky results. You could just replace the RC210 and let the ASL server do all the work. As soon as I can get to my site that's what I'll be doing and the RC210 will be on ebay (I hate it). 73 de K0JSC ________________________________ From: Tim Sawyer [mailto:tim.sawyer@me.com] Sent: Monday, June 18, 2012 12:17 PM To: pete M Cc: APP RPT Subject: Re: [App_rpt-users] Allstar and echolink Yes, your allstar node will let any connected nodes, be they echolink or allstar, will hear and talk to all connected nodes. Also, you could ditch the rc-210 and let Allstar (and 2 URIs or 2 RTCMs) do it all. You'll find your TT command structure much less complicated that way. -- Tim :wq On Jun 18, 2012, at 8:53 AM, pete M wrote: I have a small question If I have a net and my repeater is connected to some node on echolink and some user on allstar. Will both user type will ear each other? Let me explain my setup I want to do. First I have 2 repeater connected to a rc-210 constroler (one Vhf , one UHF) on port 1 and 2 I want to connect my allstar computer to port 3 and connect it to port 1 and 2 during the net. Right now I only have a Link to echolink by UHF and all the delay that add up is very annoying. And I want to use Allstar to connect some remote user and repeater to our network. I will use a Thin Client with a URI as the allstar computer) Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users