Will "Always Parrot" - Mode = 2 work headless ?
Was going to make a test/echo-node and after setting the extra node up with parrot =2 (always parrot) it does nothing. I tried to set-up as if it were a simplex node but nothing. I'm guessing this will not work on a headless node. Anyone know for sure before I dig deeper or create my own method for what I'm doing/or trying to do. ...mike/kb8jnm
Since Asterisk/Allstar is designed specifically to be run headless, I would guess it is something with your configuration. On Thu, May 24, 2018 at 5:46 PM, Mike <mm@midnighteng.com> wrote:
Was going to make a test/echo-node and after setting the extra node up with parrot =2
(always parrot) it does nothing.
I tried to set-up as if it were a simplex node but nothing.
I'm guessing this will not work on a headless node.
Anyone know for sure before I dig deeper or create my own method for what I'm doing/or trying to do.
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I THINK the parrot mode will parrot radio traffic, not network traffic. I'm sure someone will correct me. Steve On 5/25/2018 8:34 AM, Brett Friermood wrote:
Since Asterisk/Allstar is designed specifically to be run headless, I would guess it is something with your configuration.
On Thu, May 24, 2018 at 5:46 PM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Was going to make a test/echo-node and after setting the extra node up with parrot =2
(always parrot) it does nothing.
I tried to set-up as if it were a simplex node but nothing.
I'm guessing this will not work on a headless node.
Anyone know for sure before I dig deeper or create my own method for what I'm doing/or trying to do.
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
In my previous testing ... Parrot Mode works with the RF link, but does not work with an IAX-RPT link. ...STeve - KF5VH On 5/25/2018 7:50 AM, Steve Zingman wrote:
I THINK the parrot mode will parrot radio traffic, not network traffic. I'm sure someone will correct me.
Steve
On 5/25/2018 8:34 AM, Brett Friermood wrote:
Since Asterisk/Allstar is designed specifically to be run headless, I would guess it is something with your configuration.
On Thu, May 24, 2018 at 5:46 PM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Was going to make a test/echo-node and after setting the extra node up with parrot =2
(always parrot) it does nothing.
I tried to set-up as if it were a simplex node but nothing.
I'm guessing this will not work on a headless node.
Anyone know for sure before I dig deeper or create my own method for what I'm doing/or trying to do.
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
participants (4)
-
Brett Friermood -
Mike -
Steve Mahler -
Steve Zingman