I run those Tim they work fine. I also have the Trimble based bg7tbl units that act weird and so far I can't get pps from them. K0jsc On Aug 12, 2017 10:00, <app_rpt-users-request@lists.allstarlink.org> wrote:

Send App_rpt-users mailing list submissions to app_rpt-users@lists.allstarlink.org

To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@lists.allstarlink.org

You can reach the person managing the list at app_rpt-users-owner@lists.allstarlink.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

This site is dedicated to the memory of Jim Dixon WB6NIL

Today's Topics:

1. Re: ctcss Encode Issues (Michael "Lee" Lockwood) 2. Possible Trimble GRS Alternative (Tim Sawyer)

----------------------------------------------------------------------

Message: 1 Date: Fri, 11 Aug 2017 14:06:36 -0500 From: "Michael \"Lee\" Lockwood" <michael@lockwood.us.com> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] ctcss Encode Issues Message-ID: <CALfOzwTmaUd-75nnVGAftWOun7DkD29KnvdyUNVo3N -QM2ankA@mail.gmail.com> Content-Type: text/plain; charset="utf-8"

Fantastic... Now I'll just patiently wait. Who am I kidding? Knowing that there's new things in the works is exciting!

On Fri, Aug 11, 2017 at 10:51 AM, Steve Zingman <szingman@msgstor.com> wrote:

...

It will be looked at. Work is happening on channel drivers now. (among a LOT of other things)

Steve N4IRS

On 8/11/2017 11:39 AM, Michael "Lee" Lockwood wrote:

Understood, thanks Tom! I hope this does get implemented, or finalized at some point.

On Fri, Aug 11, 2017 at 10:36 AM, Tom Hayward <tom@tomh.us> wrote:

...

On Fri, Aug 11, 2017 at 8:28 AM, Michael "Lee" Lockwood <michael@lockwood.us.com> wrote:

...

Just to circle back on this topic...

I tried itxctcss = as both 1 and 0 and no difference on this.

If I'm understanding correctly, at this point app_rpt does only

transmit the "default" ctcss for the repeater tail and courtesy tone, by design. It does not transmit the other txctcss tones in the usbradio.conf file. I haven't misconfigured anything?

If I were designing it, I would have done it this way, so I think that yes it is acting as designed.

However, since the itxctcss command exists, it should follow the itxctcss command. It sounds like that piece was never implemented. This is sort of halfway between a feature request and a bug report, but I think it should be programmed so that when itxctcss == 1 it operates as it does now, and when itxctcss == 0 it should operate as you request, transmitting the input tone through the end of the transmission.

Tom KD7LXL _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

--

*Michael "Lee" Lockwood* michael@lockwood.us.com

_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp:// lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

--

*Michael "Lee" Lockwood* michael@lockwood.us.com