Good day all. I have my asterisk configuration connected to a RLC-DSP404 controller. The controller does a fine job of iding in cw. I would like to disable it in the asterisk rpt.conf file. No need for two iders. Is it as simple as commenting out the idrecording line. Or I could set the idtime to a very long time and have it very seldom id. Comments or suggestions welcome. Keith -- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
Hi Keith: In the rpt.conf file set duplex=0 That will disable the ID, hang time, etc. Still have not had cycles to review your cfg files in detail - work stuff had me tied up for a couple of days. R. Sent on the TELUS Mobility network with BlackBerry -----Original Message----- From: Keith Goobie <keith@goobie.org> Sender: app_rpt-users-bounces@ohnosec.org Date: Fri, 23 Nov 2012 21:02:03 To: app_rpt-users@ohnosec.org list<App_rpt-users@ohnosec.org> Subject: [App_rpt-users] ID Interval on Asterisk _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Hi Ramesh and Buddy I set the duplex=0 in the rpt.conf and usbradio.conf files and it is looking very good. It was based on reports I am getting still doing the CW id. I have commented out the line and we are now operational. All bugs have been resolved. Take your time on the files. We are now working. It has been tested and the audio reports we are getting is quite good. Keith On 11/23/12 10:08 PM, "Ramesh Dhami, VA3UV/M" <ramesh@va3uv.com> wrote:
Hi Keith:
In the rpt.conf file set duplex=0
That will disable the ID, hang time, etc.
Still have not had cycles to review your cfg files in detail - work stuff had me tied up for a couple of days.
R.
Sent on the TELUS Mobility network with BlackBerry
-----Original Message----- From: Keith Goobie <keith@goobie.org> Sender: app_rpt-users-bounces@ohnosec.org Date: Fri, 23 Nov 2012 21:02:03 To: app_rpt-users@ohnosec.org list<App_rpt-users@ohnosec.org> Subject: [App_rpt-users] ID Interval on Asterisk
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
participants (2)
-
Keith Goobie -
Ramesh Dhami, VA3UV/M