Wondering if it was possible in app_rpt to make Allstar send a different Courtesy Tone (like a raspberry or a warning tone) if the RSSI is too low, like a marginal signal. Monty
no, but couldnt you just set your squelch setting higher?? JIM From: monty@ke7jvx.com Date: Thu, 31 Mar 2011 22:58:28 -0700 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RSSI and Courtesy Tone Wondering if it was possible in app_rpt to make Allstar send a different Courtesy Tone (like a raspberry or a warning tone) if the RSSI is too low, like a marginal signal. Monty _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
If you can derive the RSSI voltage, connect it to an Op-Amp to get a high/low style logic signal (adjustable threshold). Connect that to an GPIO input and use the Event Management System to redefine the CT tone dynamically. At least in theory that's how I would do it. It's a good thought, many areas of app_rpt can be enhanced if you look into the source code long enough. Tony On 04/01/2011 12:58 AM, Monty wrote:
Wondering if it was possible in app_rpt to make Allstar send a different Courtesy Tone (like a raspberry or a warning tone) if the RSSI is too low, like a marginal signal.
Monty
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Jim Duuuude -
Monty -
Tony KT9AC