Re: [App_rpt-users] trouble connecting
Can't leave well enough alone. OK, downloaded the config from allstar to my box, asterisk runs, doesn't talk to the radio... Arrrrrrrghh! GeorgeC On 7/16/2016 10:28 AM, David McGough wrote:
Hi George,
The most recent rpt_extnode lists still show you using port 4569.
If you've switch the asterisk software and router at your end to 4570 (or something else), you need to also change the port used in the web portal (https://allstarlink.org/ ).
73, David KB4FXC
On Sat, 16 Jul 2016, George Csahanin wrote:
Still some nodes that show online that I cannot connect to but I may have messed up something with the node list download in my hacking. The one I have been able to connect to has an entry in rpt.conf. But at least that connection is up, and it is the normal config.
Thanks
GeorgeC
On 7/16/2016 10:04 AM, Steve Zingman wrote:
Great. Glad you are up and running.
73, Steve N4IRS
On 07/16/2016 10:02 AM, George Csahanin wrote:
Steve, I just started poking in the router and saw that Verizon has services on port 4567, and took a wild guess that they may be blocking some stuff. Moved my node to 4570 and it all works. Just about 5 minutes ago.
Go figure.
GeorgeC
On 7/16/2016 9:52 AM, Steve Zingman wrote:
George, What is the result of the Asterisk CLI command: iax2 show registry
Lets start there
On 07/16/2016 09:48 AM, George Csahanin wrote:
Stumped, maybe because I've played with this stuff a lot over the last 7 years...but...my ISP just changed my IP address. No longer can connect to anything and the last extnodes file was right before they made the change Thursday night. Might have been Wednesday, doesn't matter. There was nothing to change in the rpt.conf file, everything looks normal except the only obvious thing is that I'm not seeing rpt_extnodes updating. I put an entry in rpt.conf for a node I normally connect to (27891) and get /__auto_congest: Auto-congesting call due to slow response// /Checked port forwarding rules on the Verizon router, and is normal. I also *can* connect to usual nodes via the echolink port./(W8VT is 27849 and 606945 echo. echo works)
/Really stumped but operating under a medically induced handicap (fever). Anybody have any words of wisdom as to what I may be overlooking. Worked fine until Verizon re-did everything that night. /
/Again, thanks for bearing with me but this bug has me down and this isn't looking too clear to me.
GeorgeC W2DB 2360/
/
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Hi George, Ouch! Sorry to hear that. Yes, you've got to be very careful initiating a config download from the web portal since that operation will wipe your local changes out. 73, David KB4FXC On Sat, 16 Jul 2016, George Csahanin wrote:
Can't leave well enough alone.
OK, downloaded the config from allstar to my box, asterisk runs, doesn't talk to the radio...
Arrrrrrrghh!
GeorgeC
On 7/16/2016 10:28 AM, David McGough wrote:
Hi George,
The most recent rpt_extnode lists still show you using port 4569.
If you've switch the asterisk software and router at your end to 4570 (or something else), you need to also change the port used in the web portal (https://allstarlink.org/ ).
73, David KB4FXC
On Sat, 16 Jul 2016, George Csahanin wrote:
Still some nodes that show online that I cannot connect to but I may have messed up something with the node list download in my hacking. The one I have been able to connect to has an entry in rpt.conf. But at least that connection is up, and it is the normal config.
Thanks
GeorgeC
On 7/16/2016 10:04 AM, Steve Zingman wrote:
Great. Glad you are up and running.
73, Steve N4IRS
On 07/16/2016 10:02 AM, George Csahanin wrote:
Steve, I just started poking in the router and saw that Verizon has services on port 4567, and took a wild guess that they may be blocking some stuff. Moved my node to 4570 and it all works. Just about 5 minutes ago.
Go figure.
GeorgeC
On 7/16/2016 9:52 AM, Steve Zingman wrote:
George, What is the result of the Asterisk CLI command: iax2 show registry
Lets start there
On 07/16/2016 09:48 AM, George Csahanin wrote:
Stumped, maybe because I've played with this stuff a lot over the last 7 years...but...my ISP just changed my IP address. No longer can connect to anything and the last extnodes file was right before they made the change Thursday night. Might have been Wednesday, doesn't matter. There was nothing to change in the rpt.conf file, everything looks normal except the only obvious thing is that I'm not seeing rpt_extnodes updating. I put an entry in rpt.conf for a node I normally connect to (27891) and get /__auto_congest: Auto-congesting call due to slow response// /Checked port forwarding rules on the Verizon router, and is normal. I also *can* connect to usual nodes via the echolink port./(W8VT is 27849 and 606945 echo. echo works)
/Really stumped but operating under a medically induced handicap (fever). Anybody have any words of wisdom as to what I may be overlooking. Worked fine until Verizon re-did everything that night. /
/Again, thanks for bearing with me but this bug has me down and this isn't looking too clear to me.
GeorgeC W2DB 2360/
/
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
participants (2)
-
David McGough -
George Csahanin