Is there some Echolink test commands? We've got a new node up and running but can't get Echolink to register. It's only seen as going out port 80 but nothing else. I've tried two different working config files and firewall settings are open from 5198 to 5200 TCP/UDP. Thanks, Tony
You'll know Echolink is working when you get the typical silent connection followed 2 seconds later by a disconnection. :-( Bote
-----Original Message----- From: Tony KT9AC Sent: Sunday, 04 September, 2011 12:30
Is there some Echolink test commands? We've got a new node up and running but can't get Echolink to register. It's only seen as going out port 80 but nothing else. I've tried two different working config files and firewall settings are open from 5198 to 5200 TCP/UDP.
Thanks, Tony _______________________________________________
Amen On 4 September 2011 18:01, Bote Man <bote_radio@botecomm.com> wrote:
You'll know Echolink is working when you get the typical silent connection followed 2 seconds later by a disconnection. :-(
Bote
-----Original Message----- From: Tony KT9AC Sent: Sunday, 04 September, 2011 12:30
Is there some Echolink test commands? We've got a new node up and running but can't get Echolink to register. It's only seen as going out port 80 but nothing else. I've tried two different working config files and firewall settings are open from 5198 to 5200 TCP/UDP.
Thanks, Tony _______________________________________________
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, connection followed by non-clueful operator that has a weight on their space key and proceeds to repeatedly time out your machine(s). -- Bryan Sent from my iPhone please forgive misspellings... On Sep 4, 2011, at 2:41 PM, Matt Beasant <g4rky@yahoo.co.uk> wrote:
Amen
On 4 September 2011 18:01, Bote Man <bote_radio@botecomm.com> wrote: You'll know Echolink is working when you get the typical silent connection followed 2 seconds later by a disconnection. :-(
Bote
-----Original Message----- From: Tony KT9AC Sent: Sunday, 04 September, 2011 12:30
Is there some Echolink test commands? We've got a new node up and running but can't get Echolink to register. It's only seen as going out port 80 but nothing else. I've tried two different working config files and firewall settings are open from 5198 to 5200 TCP/UDP.
Thanks, Tony _______________________________________________
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Some say that is a router problem.....should that be user.....seems to be much more prevelant....authors take note!! D ----- Original Message ----- From: Matt Beasant To: Bote Man Cc: App_rpt-users@ohnosec.org Sent: Sunday, September 04, 2011 7:41 PM Subject: Re: [App_rpt-users] Echolink test commands Amen On 4 September 2011 18:01, Bote Man <bote_radio@botecomm.com> wrote: You'll know Echolink is working when you get the typical silent connection followed 2 seconds later by a disconnection. :-( Bote > -----Original Message----- > From: Tony KT9AC > Sent: Sunday, 04 September, 2011 12:30 > > Is there some Echolink test commands? We've got a new node up and > running but can't get Echolink to register. It's only seen as going > out > port 80 but nothing else. I've tried two different working config > files > and firewall settings are open from 5198 to 5200 TCP/UDP. > > Thanks, > Tony > _______________________________________________ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ------------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
All the responses were funny...I found the problem and it was a misplaced tab within the Echolink.conf file. Copied the sample and carefully edited it. Hey, we went from a Windows PC with Echolink to a Linux Server running Allstar and Echolink - that's worth something!! Tony On 09/04/2011 11:29 AM, Tony KT9AC wrote:
Is there some Echolink test commands? We've got a new node up and running but can't get Echolink to register. It's only seen as going out port 80 but nothing else. I've tried two different working config files and firewall settings are open from 5198 to 5200 TCP/UDP.
Thanks, Tony
participants (5)
-
Bote Man -
Bryan Boyle -
DougH -
Matt Beasant -
Tony KT9AC