Hey Steve. Yes I did. But it seems that I have a bad audio fob but luckily I had another one just like the one I was using and all is working well now. This is the first time that Ive had a chance to set things back up after you manually installed DIAL onto this machine of mine, so this is why it took a few weeks to figure this was happening. Thanks for the response. Oh yeah, how is the usb-serial adapter for COR, PTT and so forth coming? Keep me in the loop. Thanks again. Harold -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Tuesday, May 30, 2017 2:54 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] No Receive Audio Since Dial Swithover Harold, Did you run radio-tune-menu to set levels? On 05/30/2017 02:23 AM, K7ILO wrote:

Hey Gang.

First, I have no idea of where to start looking so this is why I'm asking this. Second, I know this has probably been solved through the group here so forgive me since I hadn’t checked this email in some time.

I was recently upgraded to the DIAL distro of allstar and I am using the same usbradio.conf file I used under ACID. Now, I do not have any receive (inbound) audio but I do have transmit (outbound) audio. Is there some new mixer settings that has been added to DIAL or new parameters I need to configure?

Thanks all for any assistance.

Harold K7ILO

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.