I am unable to connect to my node from the webtransceiver and don't see it listed on the active nodes page. I use an alternate iax port because i have to.

From reading other posts… it seems I may need an admin to change my iax port from 4569 to what I now want to use which is 4570? thoughts?

My registration is still showing 4569 and am forwarding 4570 on my router to my ACID box. cruiser*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State <myip>:4569 N 28970 <myip>:4569 60 Registered I’m not seeing my node show up and believe this is the cause. In my iax.conf I have bindport set 4570 and also in server config under network I set port 4570 on the portal. looking at rpt_extnodes i see my node listed with the correct port... 28970=radio@<myip>:4570/28970,<myip> [general] bindaddr=0.0.0.0 bindport=4570 .... register=28970:<mypasswd>@register.allstarlink.org