Guessing that is a HamVOIP version, you should check with those folks for specific help. And you might mention to them which version chip in your sound fob. But you might also try a reboot without it and then fresh boot and setup to other header port (left<>right). Can't hurt. ...mike/kb8jnm On 3/24/2019 10:31 AM, Rachid Karroo wrote:

Hi all I have installed Image Version 1.5rc50on a Raspi 3 and follow the instructions menu to set it. I am using a sound FOB card and VOX as Simplex. I also installed Echolink.

I am unable to access my node via a VHF handheld.

On Supermon, the PTT remains idle. Connecting to other Nodes and monitoring works fine, the transmission is repeated here on my local VHF frequency.

Access via Echolink Android, also works well.

Any help please?

73s Rachid 3B8FP Node 40248

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.