I run a 706 as a simplex base at home. With a URI connected to the data/packet connector. Set the "packet speed" parameter (sorry I can't remember the actual name) in the radio to 9600. Then I use the software DSP . Let the software do the de-emphasis/PL decode. And let the radio do PL encode and pre- emphasis. I haven't tried it yet as a frequency agile remote. No GPIO to deal with. Ross Johnson <kc7rjk@comcast.net> wrote:

Hello group, I’m new to the list, fairly new to Allstar as well, and love the systems flexibility great work everyone.

I’m adding a IC706 remote base to my system. I was hoping to use the URI for this job but in going through the documents I see the the wiring schematic is detailed for the 4 port PCI interface. Can a URI be used in it’s place using the GPOI’s of the URI in place of the UIO’s of the PCI interface. Here’s the diagram I was using to interface the 706. http://images.ohnosec.org/ic706.pdf

If this is not possible what would be the best alternative? For instance using an rs232 interface for control with the uri or FOB for audio and PTT/COR?

Again thanks for your time.

Ross kc7rjk Eugene OR 29649-29651 www.kc7rjk.net

------------------------------------------------------------------------

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- Sent from my Android phone with K-9 Mail. Please excuse my brevity.