Random node assignments
I've been running a 2 node URI Dial setup on a computer with no issues. Last night I installed a 3rd URI node and now every time I reboot asterisk it randomly assigns the node number to each radio/URI pair and it's never the same. I'm not using a USB hub but just the USB ports on the back of the computer and I have left things plugged into the same ports. I've tried swapping USB to node via radio-tune-menu which works until I reboot. Thoughts? John N2YP -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
When it works, does the tune config file reflect what is seen in lsusb? Thanks, Bob k6ecm 73 Sent from my iPhone
On Mar 7, 2018, at 2:02 PM, John Rudolph- N2YP <John@n2yp.com> wrote:
I've been running a 2 node URI Dial setup on a computer with no issues. Last night I installed a 3rd URI node and now every time I reboot asterisk it randomly assigns the node number to each radio/URI pair and it's never the same. I'm not using a USB hub but just the USB ports on the back of the computer and I have left things plugged into the same ports. I've tried swapping USB to node via radio-tune-menu which works until I reboot. Thoughts?
John N2YP -- Sent from my Android device with K-9 Mail. Please excuse my brevity. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
First, Get the swap command so the node number has the right URI attached, then perform a Write (w) function in your radio-tune-menu for BOTH nodes. See if that helps. On Wed, Mar 7, 2018 at 4:38 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
When it works, does the tune config file reflect what is seen in lsusb?
Thanks, Bob k6ecm 73 Sent from my iPhone
On Mar 7, 2018, at 2:02 PM, John Rudolph- N2YP <John@n2yp.com> wrote:
I've been running a 2 node URI Dial setup on a computer with no issues. Last night I installed a 3rd URI node and now every time I reboot asterisk it randomly assigns the node number to each radio/URI pair and it's never the same. I'm not using a USB hub but just the USB ports on the back of the computer and I have left things plugged into the same ports. I've tried swapping USB to node via radio-tune-menu which works until I reboot. Thoughts?
John N2YP -- Sent from my Android device with K-9 Mail. Please excuse my brevity. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
participants (3)
-
Bob Pyke -
John Rudolph- N2YP -
Skyler F