usbradio config - setup from portal after clean re-install - now I get this asterisk -vvvvvvv... ..... pbx_config.so => (Text Extension Configuration) Asterisk Ready. *CLI> == Parsing '/etc/asterisk/rpt.conf': Found -- Loading initial config for repeater 28344 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 6 00:26:32] NOTICE[823]: app_rpt.c:21988 rpt_master: Normal Repeater Init 28344 -- Re-Loading config for repeater 28344 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 6 00:26:32] WARNING[838]: channel.c:3051 ast_request: No channel type registered for 'Radio' rpt:Sorry unable to obtain Rx channel -- Re-Loading config for repeater 28344 [Oct 6 00:26:32] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 28344 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 6 00:26:32] WARNING[839]: channel.c:3051 ast_request: No channel type registered for 'Radio' rpt:Sorry unable to obtain Rx channel [Oct 6 00:26:34] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344 [Oct 6 00:26:34] WARNING[823]: app_rpt.c:22044 rpt_master: -- Re-Loading config for repeater 28344 rpt_thread restarted on node 28344 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 6 00:26:34] WARNING[840]: channel.c:3051 ast_request: No channel type registered for 'Radio' rpt:Sorry unable to obtain Rx channel [Oct 6 00:26:36] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344 -- Re-Loading config for repeater 28344 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 6 00:26:36] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 28344 [Oct 6 00:26:36] WARNING[841]: channel.c:3051 ast_request: No channel type registered for 'Radio' rpt:Sorry unable to obtain Rx channel [Oct 6 00:26:38] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344 [Oct 6 00:26:38] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 28344 -- Re-Loading config for repeater 28344 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 6 00:26:38] WARNING[842]: channel.c:3051 ast_request: No channel type registered for 'Radio' rpt:Sorry unable to obtain Rx channel [Oct 6 00:26:40] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344 [Oct 6 00:26:40] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 28344 -- Re-Loading config for repeater 28344 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 6 00:26:40] WARNING[843]: channel.c:3051 ast_request: No channel type registered for 'Radio' rpt:Sorry unable to obtain Rx channel [Oct 6 00:26:42] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344 [Oct 6 00:26:42] WARNING[823]: app_rpt.c:22044 rpt_master: -- Re-Loading config for repeater 28344 rpt_thread restarted on node 28344 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 6 00:26:42] WARNING[844]: channel.c:3051 ast_request: No channel type registered for 'Radio' rpt:Sorry unable to obtain Rx channel [Oct 6 00:26:44] ERROR[823]: app_rpt.c:22027 rpt_master: Continual RPT thread restarts, killing Asterisk root@KC7DMF-2:/etc/asterisk# rpt.conf: [28344] ; Change this to your assigned node number rxchannel=Radio/usb28344 duplex=1 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule28344 morse=morse28344 macro=macro28344 functions=functions28344 phone_functions=functions28344 link_functions=functions28344 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iKC7DMF accountcode=RADIO hangtime=100 althangtime=100 totime=170000 idtime=540000 politeid=3000 usbradio.conf ; Usbradio channel driver Configuration File ; [general] [usb28344] hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=123.0 rxctcssfreqs=123.0 txctcssfreqs=123.0 ;rxctcssoverride=0 carrierfrom=usb ctcssfrom=usb rxdemod=flat txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0 #includeifexists custom/usbradio.conf there is no usbradio_tune created when running radio-tune-menu root@KC7DMF-2:/etc/asterisk# Error parsing device parameters Anyone have some ideas where I can start with this? Mark
Mark, Edit /etc/asterisk/modules.conf change: load => chan_simpleusb.so ; Simple USB Radio Interface Channel Drive noload => chan_simpleusb.so ; Simple USB Radio Interface Channel Drive and noload => chan_usbradio.so ; USB Console Channel Driver load => chan_usbradio.so ; USB Console Channel Driver In other words, disable the simpleusb channel driver and enable chanusbradio channel driver. 73, Steve N4IRS On 10/06/2015 03:38 AM, Mark Johnston wrote:
usbradio config - setup from portal after clean re-install -
now I get this
asterisk -vvvvvvv...
.....
pbx_config.so => (Text Extension Configuration)
Asterisk Ready.
*CLI> == Parsing '/etc/asterisk/rpt.conf': Found
-- Loading initial config for repeater 28344
== Parsing '/etc/asterisk/rpt.conf': Found
[Oct 6 00:26:32] NOTICE[823]: app_rpt.c:21988 rpt_master: Normal Repeater Init 28344
-- Re-Loading config for repeater 28344
== Parsing '/etc/asterisk/rpt.conf': Found
[Oct 6 00:26:32] WARNING[838]: channel.c:3051 ast_request: No channel type registered for 'Radio'
rpt:Sorry unable to obtain Rx channel
-- Re-Loading config for repeater 28344
[Oct 6 00:26:32] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 28344
== Parsing '/etc/asterisk/rpt.conf': Found
[Oct 6 00:26:32] WARNING[839]: channel.c:3051 ast_request: No channel type registered for 'Radio'
rpt:Sorry unable to obtain Rx channel
[Oct 6 00:26:34] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344
[Oct 6 00:26:34] WARNING[823]: app_rpt.c:22044 rpt_master: -- Re-Loading config for repeater 28344
rpt_thread restarted on node 28344
== Parsing '/etc/asterisk/rpt.conf': Found
[Oct 6 00:26:34] WARNING[840]: channel.c:3051 ast_request: No channel type registered for 'Radio'
rpt:Sorry unable to obtain Rx channel
[Oct 6 00:26:36] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344
-- Re-Loading config for repeater 28344
== Parsing '/etc/asterisk/rpt.conf': Found
[Oct 6 00:26:36] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 28344
[Oct 6 00:26:36] WARNING[841]: channel.c:3051 ast_request: No channel type registered for 'Radio'
rpt:Sorry unable to obtain Rx channel
[Oct 6 00:26:38] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344
[Oct 6 00:26:38] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 28344
-- Re-Loading config for repeater 28344
== Parsing '/etc/asterisk/rpt.conf': Found
[Oct 6 00:26:38] WARNING[842]: channel.c:3051 ast_request: No channel type registered for 'Radio'
rpt:Sorry unable to obtain Rx channel
[Oct 6 00:26:40] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344
[Oct 6 00:26:40] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 28344
-- Re-Loading config for repeater 28344
== Parsing '/etc/asterisk/rpt.conf': Found
[Oct 6 00:26:40] WARNING[843]: channel.c:3051 ast_request: No channel type registered for 'Radio'
rpt:Sorry unable to obtain Rx channel
[Oct 6 00:26:42] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread restarted on 28344
[Oct 6 00:26:42] WARNING[823]: app_rpt.c:22044 rpt_master: -- Re-Loading config for repeater 28344
rpt_thread restarted on node 28344
== Parsing '/etc/asterisk/rpt.conf': Found
[Oct 6 00:26:42] WARNING[844]: channel.c:3051 ast_request: No channel type registered for 'Radio'
rpt:Sorry unable to obtain Rx channel
[Oct 6 00:26:44] ERROR[823]: app_rpt.c:22027 rpt_master: Continual RPT thread restarts, killing Asterisk
root@KC7DMF-2:/etc/asterisk#
rpt.conf:
[28344] ; Change this to your assigned node number
rxchannel=Radio/usb28344
duplex=1
erxgain=-3
etxgain=3
;controlstates=controlstates
scheduler=schedule28344
morse=morse28344
macro=macro28344
functions=functions28344
phone_functions=functions28344
link_functions=functions28344
telemetry=telemetry
wait_times=wait-times
context = radio
callerid = "Repeater" <0000000000>
idrecording = |iKC7DMF
accountcode=RADIO
hangtime=100
althangtime=100
totime=170000
idtime=540000
politeid=3000
usbradio.conf
; Usbradio channel driver Configuration File
;
[general]
[usb28344]
hdwtype=0
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=123.0
rxctcssfreqs=123.0
txctcssfreqs=123.0
;rxctcssoverride=0
carrierfrom=usb
ctcssfrom=usb
rxdemod=flat
txprelim=yes
txlimonly=no
txtoctype=notone
txmixa=composite
txmixb=no
invertptt=0
duplex=0
rxondelay=0
rxnoisefiltype=0
eeprom=0
#includeifexists custom/usbradio.conf
there is no usbradio_tune created
when running radio-tune-menu
root@KC7DMF-2:/etc/asterisk# Error parsing device parameters
Anyone have some ideas where I can start with this?
Mark
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
After changing the noload and load options - plus a couple of reboots, why one wasn't enough, I have no idea, so far so good - except for waiting to see if my node will show up in the /etc...../rpt_extnodes hopefully Also wondered if there was more documentation on the modules you can load? How to use them - I see there is a voicemail one and icecast etc, just curious how some of those would work... they appear to be new for those coming from ACID. Thanks, Mark
Mark, It's in <http://stats.allstarlink.org/> Showing up for about 12 min. Also in rpt_extnodes 73, Steve N4IRS On 10/6/2015 12:17 PM, Mark Johnston wrote:
After changing the noload and load options - plus a couple of reboots, why one wasn't enough, I have no idea, so far so good - except for waiting to see if my node will show up in the /etc...../rpt_extnodes hopefully
Also wondered if there was more documentation on the modules you can load? How to use them - I see there is a voicemail one and icecast etc, just curious how some of those would work... they appear to be new for those coming from ACID.
Thanks,
Mark
Actually they are the same modules as ACID. All I did was break out the loading and noload rather then load all except... Steve On 10/6/2015 12:17 PM, Mark Johnston wrote:
After changing the noload and load options - plus a couple of reboots, why one wasn't enough, I have no idea, so far so good - except for waiting to see if my node will show up in the /etc...../rpt_extnodes hopefully
Also wondered if there was more documentation on the modules you can load? How to use them - I see there is a voicemail one and icecast etc, just curious how some of those would work... they appear to be new for those coming from ACID.
Thanks,
Mark
participants (2)
-
Mark Johnston -
Steve Zingman