Many thanks for your reply, Johnny! I have another problem, I have no internet connection. See the reply from Robert. 73! Thomas, IW3AMQ Date: Thu, 23 May 2013 19:37:44 -0700 From: cypresstower@yahoo.com Subject: Re: [App_rpt-users] How to connect five nodes on different mountains connected via WLan (HamNet? To: iw3amq@dnet.it You could try this: ADD the following TWO LINES to your ilink commands located under the functions stanza in your rpt.conf [functions] 03=ilink,13 ;permanently connected link 01=ilink,11 ;permanently disconnected link restart your node now if you want to permanently connect a link do this *03xxxxx to disconnect this previously permanently connected link *01xxxxx --- On Thu, 5/23/13, Thomas Delmonego <iw3amq@dnet.it> wrote: From: Thomas Delmonego <iw3amq@dnet.it> Subject: [App_rpt-users] How to connect five nodes on different mountains connected via WLan (HamNet? To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Date: Thursday, May 23, 2013, 8:49 AM Hi to all! I try to connect five repeaters (nodes) on different mountains and provided with AllStarLink on Acid OS. All mountains are connected with HamNet, an Amateur wireless lan operating in 2,4 GHz and 5,8 GHz Amateur Band and with no connection to Internet. How can I configure AllStarLink files to create a permanent connection? Can anyone help me with instructions for a beginner? Many thanks to all group! 73! Thomas, IW3AMQ -----Inline Attachment Follows----- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users