I am transitioning our repeater from IRLP to ALLSTAR and I am having some trouble. I installed ACID, and it went without any trouble. With the URI connected, the green light blinks. I can ping yahoo.com, and I have ports 4569 and 222 forwarded. As it stands, the node (28325, W3YT) shows up on the web transceiver in green, but nobody seems to be able to connect to it. nscheck.sh gives an output of Node 1, Node 2 are up, node 3, node 4 are down (whatever that means). I do not have the repeater connected, but I assume that one should be able to connect to the node, regardless of whether there is anything connected to the URI. It seems to me that I am missing something here. Can someone get me past this? steve W3RX trustee for W3YT repeater IRLP 8676 Allstar 28325 PS Minor question, on my node info, I somehow never saw the chance to put in the freq, tone, and description of the repeater. Can that be done now?
Using the CLI, I can connect from both 27783 and 27784. But within seconds it disconnects with this message: [Jan 30 14:00:05] NOTICE[2580]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response So you're mostly there. Maybe a network performance issue? What happens if you use the CLI to connect to another node? Feel free to use 27826 (Loganville, PA HUB) to test. Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes" ----- Original Message ----- From: "Stephen Liggett" <steve10000@comcast.net> To: "app rpt-users" <app_rpt-users@ohnosec.org> Sent: Monday, January 30, 2012 1:41:13 PM Subject: [App_rpt-users] getting started trouble I am transitioning our repeater from IRLP to ALLSTAR and I am having some trouble. I installed ACID, and it went without any trouble. With the URI connected, the green light blinks. I can ping yahoo.com, and I have ports 4569 and 222 forwarded. As it stands, the node (28325, W3YT) shows up on the web transceiver in green, but nobody seems to be able to connect to it. nscheck.sh gives an output of Node 1, Node 2 are up, node 3, node 4 are down (whatever that means). I do not have the repeater connected, but I assume that one should be able to connect to the node, regardless of whether there is anything connected to the URI. It seems to me that I am missing something here. Can someone get me past this? steve W3RX trustee for W3YT repeater IRLP 8676 Allstar 28325 PS Minor question, on my node info, I somehow never saw the chance to put in the freq, tone, and description of the repeater. Can that be done now? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Are you using dhcp or static ip address? I had trouble using a static ip address. make sure you have a default route for the acid box. -----Original Message----- From: "Robert A. Poff WB3AWJ" <wb3awj@comcast.net> Sender: app_rpt-users-bounces@ohnosec.org Date: Mon, 30 Jan 2012 19:04:42 To: Stephen Liggett<steve10000@comcast.net> Cc: app rpt-users<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] getting started trouble _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
On 1/30/12 1:41 PM, Stephen Liggett wrote:
I am transitioning our repeater from IRLP to ALLSTAR and I am having some trouble.
I installed ACID, and it went without any trouble.
Good.
With the URI connected, the green light blinks.
That's what it does. Means asterisk is talking to the hardware.
I can ping yahoo.com, and I have ports 4569 and 222 forwarded.
Yup.
As it stands, the node (28325, W3YT) shows up on the web transceiver in green, but nobody seems to be able to connect to it.
Trying now...you are right, though the online nodes show you as active, and, at this stage, up for 30 minutes. Don't have time to work thru it, maybe someone else can check... Just as a quick one...if you go into (on the allstarlink.org site), node, node configuration, your call sign, your node number, then select access settings from the submenu on the page...you'll see a pull down box for User Access via Web Transceiver...that should be enabled so you can get in via the web transceiver.
nscheck.sh gives an output of Node 1, Node 2 are up, node 3, node 4 are down (whatever that means).
The allstar servers are up.
I do not have the repeater connected, but I assume that one should be able to connect to the node, regardless of whether there is anything connected to the URI.
Should be ok to do so.
It seems to me that I am missing something here. Can someone get me past this?
Doesn't seem like it. -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.
I've had a few email exchanges with Steve this afternoon. I believe his trouble with the Web Transceiver is related to outside nodes not being able to connect inbound and stay connected.
From my nodes, when I try to connect to his, I get a connect and an almost immediate disconnect with this message from the CLI: [Jan 30 19:38:11] NOTICE[2583]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response
However, he can connect to me and stayed connected for about twenty minutes, until he told it to disconnect. If I ping the address I get from /tmp/rpt_extnodes-temp for his node I get quick response. So he's registering. And receiving the rpt-extnodes-temp file. He sent me the results from rpt stats 28325 and incoming connections are allowed. He says the correct ports are forwarded in his router. Any suggestions? -- Robert A. Poff Loganville, PA WB3AWJ - Allstar 27784 Powered by Linux On Mon, 2012-01-30 at 13:41 -0500, Stephen Liggett wrote:
I am transitioning our repeater from IRLP to ALLSTAR and I am having some trouble.
I installed ACID, and it went without any trouble.
With the URI connected, the green light blinks.
I can ping yahoo.com, and I have ports 4569 and 222 forwarded.
As it stands, the node (28325, W3YT) shows up on the web transceiver in green, but nobody seems to be able to connect to it.
nscheck.sh gives an output of Node 1, Node 2 are up, node 3, node 4 are down (whatever that means).
I do not have the repeater connected, but I assume that one should be able to connect to the node, regardless of whether there is anything connected to the URI.
It seems to me that I am missing something here. Can someone get me past this?
steve W3RX trustee for W3YT repeater IRLP 8676 Allstar 28325
PS Minor question, on my node info, I somehow never saw the chance to put in the freq, tone, and description of the repeater. Can that be done now?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I saw an "Autocongesting" message when I had another node's IP address configured wrong in RPT.CONF. I couldn't connect to him but he could connect to me no problem. 73, Jim KH2D On 1/30/2012 7:51 PM, Robert Poff wrote:
I've had a few email exchanges with Steve this afternoon. I believe his trouble with the Web Transceiver is related to outside nodes not being able to connect inbound and stay connected.
From my nodes, when I try to connect to his, I get a connect and an almost immediate disconnect with this message from the CLI: /[Jan 30 19:38:11] NOTICE[2583]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response/
However, he can connect to me and stayed connected for about twenty minutes, until he told it to disconnect.
If I ping the address I get from /tmp/rpt_extnodes-temp for his node I get quick response. So he's registering. And receiving the rpt-extnodes-temp file.
He sent me the results from rpt stats 28325 and incoming connections are allowed.
He says the correct ports are forwarded in his router.
Any suggestions?
-- /Robert A. Poff/ /Loganville, PA/
WB3AWJ/- Allstar 27784/ /Powered by Linux/
On Mon, 2012-01-30 at 13:41 -0500, Stephen Liggett wrote:
I am transitioning our repeater from IRLP to ALLSTAR and I am having some trouble.
I installed ACID, and it went without any trouble.
With the URI connected, the green light blinks.
I can ping yahoo.com, and I have ports 4569 and 222 forwarded.
As it stands, the node (28325, W3YT) shows up on the web transceiver in green, but nobody seems to be able to connect to it.
nscheck.sh gives an output of Node 1, Node 2 are up, node 3, node 4 are down (whatever that means).
I do not have the repeater connected, but I assume that one should be able to connect to the node, regardless of whether there is anything connected to the URI.
It seems to me that I am missing something here. Can someone get me past this?
steve W3RX trustee for W3YT repeater IRLP 8676 Allstar 28325
PS Minor question, on my node info, I somehow never saw the chance to put in the freq, tone, and description of the repeater. Can that be done now?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
This is a port forwarding issue. If you can connect out but not get connects inbound you need to check your ports. From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Robert Poff Sent: Monday, January 30, 2012 7:51 PM To: Stephen Liggett Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] getting started trouble I've had a few email exchanges with Steve this afternoon. I believe his trouble with the Web Transceiver is related to outside nodes not being able to connect inbound and stay connected.
From my nodes, when I try to connect to his, I get a connect and an almost immediate disconnect with this message from the CLI: [Jan 30 19:38:11] NOTICE[2583]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response
However, he can connect to me and stayed connected for about twenty minutes, until he told it to disconnect. If I ping the address I get from /tmp/rpt_extnodes-temp for his node I get quick response. So he's registering. And receiving the rpt-extnodes-temp file. He sent me the results from rpt stats 28325 and incoming connections are allowed. He says the correct ports are forwarded in his router. Any suggestions? -- Robert A. Poff Loganville, PA WB3AWJ - Allstar 27784 Powered by Linux On Mon, 2012-01-30 at 13:41 -0500, Stephen Liggett wrote: I am transitioning our repeater from IRLP to ALLSTAR and I am having some trouble. I installed ACID, and it went without any trouble. With the URI connected, the green light blinks. I can ping yahoo.com, and I have ports 4569 and 222 forwarded. As it stands, the node (28325, W3YT) shows up on the web transceiver in green, but nobody seems to be able to connect to it. nscheck.sh gives an output of Node 1, Node 2 are up, node 3, node 4 are down (whatever that means). I do not have the repeater connected, but I assume that one should be able to connect to the node, regardless of whether there is anything connected to the URI. It seems to me that I am missing something here. Can someone get me past this? steve W3RX trustee for W3YT repeater IRLP 8676 Allstar 28325 PS Minor question, on my node info, I somehow never saw the chance to put in the freq, tone, and description of the repeater. Can that be done now? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (7)
-
Bryan D. Boyle -
Jim Kehler -
Michael Hebert -
Robert A. Poff WB3AWJ -
Robert Poff
-
Scott Weis -
Stephen Liggett