Group, I have recently noted that when I reboot that the transmit remains on, and I have to shell in and do a *71 to turn it off. After that, all is OK. I use the DMK URI, fed to the remote base input of our repeater controller. In the past, I recall that from a start or reboot that the transmitter would key for a few seconds and then shut off, but not anymore. Without a lot of troubleshooting, is there a way to insert a *71 command somewhere in the startup sequence? I am not exactly sure what I am talking about here as far as this fix is concerned. Any ideas? steve W3YT repeater 28325
What is *71 on your system? -- Tim :wq On Sep 16, 2012, at 1:40 PM, Stephen Liggett <steve10000@comcast.net> wrote:
Group,
I have recently noted that when I reboot that the transmit remains on, and I have to shell in and do a *71 to turn it off. After that, all is OK. I use the DMK URI, fed to the remote base input of our repeater controller.
In the past, I recall that from a start or reboot that the transmitter would key for a few seconds and then shut off, but not anymore. Without a lot of troubleshooting, is there a way to insert a *71 command somewhere in the startup sequence? I am not exactly sure what I am talking about here as far as this fix is concerned.
Any ideas?
steve W3YT repeater 28325 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
What if you do a *70 instead of *71. This should tell you who or what is connected to you that is causing the problem. On Sep 16, 2012 3:40 PM, "Stephen Liggett" <steve10000@comcast.net> wrote:
Group,
I have recently noted that when I reboot that the transmit remains on, and I have to shell in and do a *71 to turn it off. After that, all is OK. I use the DMK URI, fed to the remote base input of our repeater controller.
In the past, I recall that from a start or reboot that the transmitter would key for a few seconds and then shut off, but not anymore. Without a lot of troubleshooting, is there a way to insert a *71 command somewhere in the startup sequence? I am not exactly sure what I am talking about here as far as this fix is concerned.
Any ideas?
steve W3YT repeater 28325 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Chuck Henderson -
Stephen Liggett -
Tim Sawyer