Beagle Board-xM Pickle Build w/URI
Hello All, I have an xM up and running with the latest build from allstarlink.org - is there one site that has example configs for iax.conf, rpt.conf, and simpleusb.conf for the xM using the URI? I currently have some radios from Yaesu - the VX-7R has been interfaced and seems to work; but my current configs are relatively simple. I also want to put a FT-7900R on line. How do you eliminate the telemetry 'node xx connected, node xx disconnected' messages from being broadcast? 73's, John AJ6BC
Set "telemetry" in the node stanza to "telemetry=0" or "telemetry=2" as documented here http://ohnosec.org/drupal/node/103 unless that functionality doesn't exist on pickle. I'm not familiar with pickle. de K0JSC On Mon, Aug 10, 2015 at 12:15 AM, John C. Westmoreland, P.E. < john@westmorelandengineering.com> wrote:
Hello All,
I have an xM up and running with the latest build from allstarlink.org - is there one site that has example configs for iax.conf, rpt.conf, and simpleusb.conf for the xM using the URI? I currently have some radios from Yaesu - the VX-7R has been interfaced and seems to work; but my current configs are relatively simple. I also want to put a FT-7900R on line.
How do you eliminate the telemetry 'node xx connected, node xx disconnected' messages from being broadcast?
73's, John AJ6BC
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hello Jeff, Yes, that appears to work just fine 73's, John AJ6BC On Aug 10, 2015 8:34 AM, "Jeff Carrier" <k0jsc.jeff@gmail.com> wrote:
Set "telemetry" in the node stanza to "telemetry=0" or "telemetry=2" as documented here http://ohnosec.org/drupal/node/103 unless that functionality doesn't exist on pickle. I'm not familiar with pickle.
de K0JSC
On Mon, Aug 10, 2015 at 12:15 AM, John C. Westmoreland, P.E. < john@westmorelandengineering.com> wrote:
Hello All,
I have an xM up and running with the latest build from allstarlink.org - is there one site that has example configs for iax.conf, rpt.conf, and simpleusb.conf for the xM using the URI? I currently have some radios from Yaesu - the VX-7R has been interfaced and seems to work; but my current configs are relatively simple. I also want to put a FT-7900R on line.
How do you eliminate the telemetry 'node xx connected, node xx disconnected' messages from being broadcast?
73's, John AJ6BC
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Check out http://ohnosec.org/pipermail/app_rpt-users/2011-February/002219.html I believe the LOX boards are gone, but you can ask DMK Thanks, Bob kk6ecm Sent from iPad
On Aug 10, 2015, at 12:15 AM, John C. Westmoreland, P.E. <john@westmorelandengineering.com> wrote:
Hello All,
I have an xM up and running with the latest build from allstarlink.org - is there one site that has example configs for iax.conf, rpt.conf, and simpleusb.conf for the xM using the URI? I currently have some radios from Yaesu - the VX-7R has been interfaced and seems to work; but my current configs are relatively simple. I also want to put a FT-7900R on line.
How do you eliminate the telemetry 'node xx connected, node xx disconnected' messages from being broadcast?
73's, John AJ6BC
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hello Bob, Thanks. Have this working with URI and VX-7R. Will soon have it working with FT-7900R and FT1DR. Works great with iaxRPT. Is it possible to get the Pickle source tree someplace? Maybe that should be in separate thread 73's, John AJ6BC On Aug 10, 2015 9:26 AM, "kk6ecm" <kk6ecm@gmail.com> wrote:
Check out http://ohnosec.org/pipermail/app_rpt-users/2011-February/002219.html
I believe the LOX boards are gone, but you can ask DMK
Thanks, Bob kk6ecm
Sent from iPad
On Aug 10, 2015, at 12:15 AM, John C. Westmoreland, P.E. < john@westmorelandengineering.com> wrote:
Hello All,
I have an xM up and running with the latest build from allstarlink.org - is there one site that has example configs for iax.conf, rpt.conf, and simpleusb.conf for the xM using the URI? I currently have some radios from Yaesu - the VX-7R has been interfaced and seems to work; but my current configs are relatively simple. I also want to put a FT-7900R on line.
How do you eliminate the telemetry 'node xx connected, node xx disconnected' messages from being broadcast?
73's, John AJ6BC
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hello Bob, Yep - thanks for that. I have the xM working with the URI and a VX-7R (mostly just for testing - but OK for light duty). 73's, John AJ6BC On Mon, Aug 10, 2015 at 9:26 AM, kk6ecm <kk6ecm@gmail.com> wrote:
Check out http://ohnosec.org/pipermail/app_rpt-users/2011-February/002219.html
I believe the LOX boards are gone, but you can ask DMK
Thanks, Bob kk6ecm
Sent from iPad
On Aug 10, 2015, at 12:15 AM, John C. Westmoreland, P.E. < john@westmorelandengineering.com> wrote:
Hello All,
I have an xM up and running with the latest build from allstarlink.org - is there one site that has example configs for iax.conf, rpt.conf, and simpleusb.conf for the xM using the URI? I currently have some radios from Yaesu - the VX-7R has been interfaced and seems to work; but my current configs are relatively simple. I also want to put a FT-7900R on line.
How do you eliminate the telemetry 'node xx connected, node xx disconnected' messages from being broadcast?
73's, John AJ6BC
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Jeff Carrier -
John C. Westmoreland, P.E. -
kk6ecm