Re: [App_rpt-users] audio problem
Yes, there is no guarantee that both nodes audio will be in sync. Are you hearing the echo between the two nodes when you are listening to both or when you are just listening to one or the other? It should not matter if they are in sync since no one generally listens to both at the same time right? 73 Doug WA3DSP http://www.crompton.com/hamradio From: mzfb@aol.com To: app_rpt-users@ohnosec.org Date: Fri, 4 Sep 2015 14:53:10 -0400 Subject: [App_rpt-users] audio problem I have a problem with connecting two Nodes with link radios attached by URI’s. Has anyone experience an audio echo when linking two nodes together? I have reading about the audio delay problems here but it’s not the same. The following is my setup; Running both nodes on an Acid system using one computer. The computer is a Pentium 4 3 Ghz, 1 Gig of Ram 80 gig HDD Both link radios are running on different bands 6 meters and 900mhz. With both connect together I get an audio echo, unlinking it will go away. Both operate just fine when separately to connected to another system but when I connect in the second node to the same system everyone hears an echo from me. I do not have a reverse of that, in that I don’t have an echo when both are connected and I am just receiving. There is no RF problem between the two radio’s. Is there an audio processing delay between the to nodes? Any thoughts or ideas would greatly be appreciated. ThanksMikeW1`ZFB This email has been protected by YAC (Yet Another Cleaner) www.yac.mx _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Doug, I talk to him all the time. If he has only his 900 my radio with him and no other radios on, and he connects his node to his 6 meters in the same box we hear an echo on our remote nodes. When he does not have them linked together all is fine to us on remote nodes. No, it isn't because he is listening to himself. Sent from my iPhone
On Sep 4, 2015, at 4:35 PM, Doug Crompton <doug@crompton.com> wrote:
Yes, there is no guarantee that both nodes audio will be in sync. Are you hearing the echo between the two nodes when you are listening to both or when you are just listening to one or the other? It should not matter if they are in sync since no one generally listens to both at the same time right?
73 Doug WA3DSP http://www.crompton.com/hamradio
From: mzfb@aol.com To: app_rpt-users@ohnosec.org Date: Fri, 4 Sep 2015 14:53:10 -0400 Subject: [App_rpt-users] audio problem
I have a problem with connecting two Nodes with link radios attached by URI’s.
Has anyone experience an audio echo when linking two nodes together?
I have reading about the audio delay problems here but it’s not the same. The following is my setup;
Running both nodes on an Acid system using one computer. The computer is a Pentium 4 3 Ghz, 1 Gig of Ram 80 gig HDD
Both link radios are running on different bands 6 meters and 900mhz.
With both connect together I get an audio echo, unlinking it will go away. Both operate just fine when separately to connected to another system but when I connect in the second node to the same system everyone hears an echo from me. I do not have a reverse of that, in that I don’t have an echo when both are connected and I am just receiving.
There is no RF problem between the two radio’s.
Is there an audio processing delay between the to nodes?
Any thoughts or ideas would greatly be appreciated.
Thanks
Mike
W1`ZFB
This email has been protected by YAC (Yet Another Cleaner) www.yac.mx
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Problem resolved. Ground loop was causing the issue. Corey. N3FE Sent from my iPhone
On Sep 4, 2015, at 4:35 PM, Doug Crompton <doug@crompton.com> wrote:
Yes, there is no guarantee that both nodes audio will be in sync. Are you hearing the echo between the two nodes when you are listening to both or when you are just listening to one or the other? It should not matter if they are in sync since no one generally listens to both at the same time right?
73 Doug WA3DSP http://www.crompton.com/hamradio
From: mzfb@aol.com To: app_rpt-users@ohnosec.org Date: Fri, 4 Sep 2015 14:53:10 -0400 Subject: [App_rpt-users] audio problem
I have a problem with connecting two Nodes with link radios attached by URI’s.
Has anyone experience an audio echo when linking two nodes together?
I have reading about the audio delay problems here but it’s not the same. The following is my setup;
Running both nodes on an Acid system using one computer. The computer is a Pentium 4 3 Ghz, 1 Gig of Ram 80 gig HDD
Both link radios are running on different bands 6 meters and 900mhz.
With both connect together I get an audio echo, unlinking it will go away. Both operate just fine when separately to connected to another system but when I connect in the second node to the same system everyone hears an echo from me. I do not have a reverse of that, in that I don’t have an echo when both are connected and I am just receiving.
There is no RF problem between the two radio’s.
Is there an audio processing delay between the to nodes?
Any thoughts or ideas would greatly be appreciated.
Thanks
Mike
W1`ZFB
This email has been protected by YAC (Yet Another Cleaner) www.yac.mx
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
Corey Dean -
Doug Crompton