SimpleUSB squelch-tail delay
We use RF links back to a Hall audio voter. Unkeying the mobile allows a short noise burst to come through as the link keying drops as fast as possible to prevent the voter from voting on "full quieting" dead carrier. Is there a way to delay the audio maybe 100 mS to allow the COR to mute the transmitter? Thanks, Duane KA1LM 42996
No, not in DIAL. I think the HamVoIP guys do this but they won't share their source code. On Tue, Jan 16, 2018 at 10:06 AM, DuaneVT . <selkie2@comcast.net> wrote:
We use RF links back to a Hall audio voter. Unkeying the mobile allows a short noise burst to come through as the link keying drops as fast as possible to prevent the voter from voting on "full quieting" dead carrier. Is there a way to delay the audio maybe 100 mS to allow the COR to mute the transmitter?
Thanks, Duane KA1LM 42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
I use an external delay board. Works fine. I also use an RTCM. On Jan 19, 2018 10:13, "Tim Sawyer" <tisawyer@gmail.com> wrote:
No, not in DIAL. I think the HamVoIP guys do this but they won't share their source code.
On Tue, Jan 16, 2018 at 10:06 AM, DuaneVT . <selkie2@comcast.net> wrote:
We use RF links back to a Hall audio voter. Unkeying the mobile allows a short noise burst to come through as the link keying drops as fast as possible to prevent the voter from voting on "full quieting" dead carrier. Is there a way to delay the audio maybe 100 mS to allow the COR to mute the transmitter?
Thanks, Duane KA1LM 42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 1/19/18 10:13 AM, Tim Sawyer wrote:
No, not in DIAL. I think the HamVoIP guys do this but they won't share their source code.
Keep in mind they have no right to distribute any of it. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
participants (4)
-
Bryan Fields -
DuaneVT . -
Sam Nabkey -
Tim Sawyer