It also must be noted, when doing a 'svcfg' on Limey Linux, it will only save the /etc dir and a couple others. Any other changes are not saved.... by default. I'm sure there might be a way around that, just have to make sure the changes to the script are saved in an area that are normally saved to flash... I use Limey Linux on a Neoware CA-22. No issues, works great. I use DSP for carrier and CTCSS detect and it works well even with weak signals into the RF portion of the node. ~Benjamin, KB9LFZ allstar node 28569 On Tue, 2013-02-19 at 14:09 -0800, Jim Duuuude wrote:

NOT GOING TO HAPPEN

Limey doesnt even have the stuff to compile the stuff to compile the stuff that you want!

If you want all that poop, use a normal distro, like ACID.

Jim

______________________________________________________________________ Date: Tue, 19 Feb 2013 16:05:31 -0500 From: kb8pmy@kb8pmy.net To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Limey Linux

Greetings all,

I was wondering if there is any one that can help me with Limey linux? I just acquired a Mini-Itx and want to run asterisk on it. I want to use it to replace the laptop that I am using for it. I need to have festival and W0AMN Weather script dependecies installed but can not find yum or apt-get on it. Can I just compile everything by hand?

73

Ryan

KB8PMY

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users