Loren, you have ctcssfrom=no in you config. Change this to match your method of PL decode. ctcssfrom = dsp if you are using dsp decode ctcssfrom = usb - from the CTCSS hardware Active high ctcss from = usbinvert - from the inverted CTCSS hardware Active low 73, Steve N4IRS On 06/09/2015 05:37 AM, app_rpt-users-request@ohnosec.org wrote:

essage: 2 Date: Tue, 9 Jun 2015 01:30:59 -0500 From: Loren Tedford<lorentedford@gmail.com> To: app_rpt mailing list<app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Configurations such as pl tones Message-ID: <CAK=eTyj7WHFQVeYRK6mMgv3fbaWpzDfT+Fb2iHbvdxK_OzGOkg@mail.gmail.com> Content-Type: text/plain; charset="utf-8"

Ok this is some thing i have been wanting to do such as configuring the URI i have to discriminate the pl tones for me however I am having a very hard time to get it to cooperate correctly.. I was finally able to get my repeater backup however its letting users with no tone transmit.... Confused greatly now I am Using a URI from DMK Engneering and I do have the Duplex cable for Motorola I am using CM200 radios and the radio channel is set to open squelch at moment for testing..

here is a copy of my current config that works in usbradio.conf ; ; Usbradio channel driver Configuration File ;

[general]

[usb29925]

hdwtype=0 rxboost=1 ;txboost=1 rxctcssrelax=1 txctcssdefault=141.3 rxctcssfreqs=141.3 txctcssfreqs=141.3 ;rxctcssoverride=0 carrierfrom=usbinvert ctcssfrom=no rxdemod=speaker txprelim=yes txlimonly=yes txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=1 rxondelay=0 rxnoisefiltype=0 eeprom=0

#includeifexists custom/usbradio.conf

This is my current Asterisk folder info I notice that there is no simpleusb.conf do i need this? to get it to work correctly?

[root@KC9ZHV-_R asterisk]# ls amd.conf echolink.conf gps.conf manager.conf rpt.conf usbradio.conf asterisk.conf echolink.old.conf iax.conf modules.conf savenode.conf usbradio.old audio extensions.conf indications.conf msg sip.conf usbradio_tune_usb29925.conf dundi.conf features.conf logger.conf myscripts system.conf zapata.conf

Thanks so much

Loren Tedford (KC9ZHV)