Alternatives to cm108/prefab boxes for PTT/COR?
I'll be honest, I have run out of CM108 fobs to modify, and almost all the new ones are epoxy covered. I'd like to put my node back up, but I want a solution that allows me to use a standard USB audio fob for audio in/out and then another fob - probably serial - for PTT and COR. Last I checked (year or two ago), there was no easy answer to this. I hacked and beat on it, didn't get anywhere Have we made any breakthroughs in PTT/COR via serial lately? Thanks in advance!
Hi Jonny, You can try this approach: http://www.qsl.net/k0kn/plri.html I used the "Asterisk parallel port interface" section and didn't have to modify the fob at all, and yes it was an epoxied fob. Monty On Wed, Feb 22, 2017 at 1:04 PM, Jonny 290 <jonny290@gmail.com> wrote:
I'll be honest, I have run out of CM108 fobs to modify, and almost all the new ones are epoxy covered.
I'd like to put my node back up, but I want a solution that allows me to use a standard USB audio fob for audio in/out and then another fob - probably serial - for PTT and COR.
Last I checked (year or two ago), there was no easy answer to this. I hacked and beat on it, didn't get anywhere
Have we made any breakthroughs in PTT/COR via serial lately?
Thanks in advance!
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I have some code that might be used for supporting serial "signaling" (COS, CTCSS, PTT) I will add this as a issue on github so it can be tracked and considered. <https://github.com/AllStarLink/Asterisk/issues> 73, Steve N4IRS On 02/22/2017 03:04 PM, Jonny 290 wrote:
I'll be honest, I have run out of CM108 fobs to modify, and almost all the new ones are epoxy covered.
I'd like to put my node back up, but I want a solution that allows me to use a standard USB audio fob for audio in/out and then another fob - probably serial - for PTT and COR.
Last I checked (year or two ago), there was no easy answer to this. I hacked and beat on it, didn't get anywhere
Have we made any breakthroughs in PTT/COR via serial lately?
Thanks in advance!
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Jonny 290 -
Monty -
Steve Zingman