Kenwood ™-V71 and D710 Remote Base
I picked up a Kenwood ™-V71 Dual Band radio here this week to play with.. It has a full rs-232 serial port on it and supports CAT control. For grins i tried the kenwood control mode in app_rpt and it failed…. running minicom I am able to control it just fine.. can do all the control functions. Looking at the CAT file the commands are the same for the ™-v71 and ™-d710.. I am wondering if somebody would be able to be able to make an update to the control code to add this radio to it's base of control radios.. I have attached the PDF with the commands.. And am able to work with anybody for testing n such.. -- Fredric Moses - W8FSM - WQOG498 fred@moses.bz
Instead of radiotype=kenwood try radiotype=tmd700 -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Fredric Moses Sent: Saturday, March 24, 2012 2:39 PM To: app_rpt List Subject: [App_rpt-users] Kenwood ™-V71 and D710 Remote Base I picked up a Kenwood ™-V71 Dual Band radio here this week to play with.. It has a full rs-232 serial port on it and supports CAT control. For grins i tried the kenwood control mode in app_rpt and it failed…. running minicom I am able to control it just fine.. can do all the control functions. Looking at the CAT file the commands are the same for the ™-v71 and ™-d710.. I am wondering if somebody would be able to be able to make an update to the control code to add this radio to it's base of control radios.. I have attached the PDF with the commands.. And am able to work with anybody for testing n such..
Hi Scott, Tried that but got nota.. Debug didn't even show attempts to try the serial port.. Is there a different version you are running of app_rpt..? -- Fredric Moses - W8FSM - WQOG498 fred@moses.bz On Mar 24, 2012, at 10:21 PM, Scott Weis wrote:
Instead of radiotype=kenwood try radiotype=tmd700
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Fredric Moses Sent: Saturday, March 24, 2012 2:39 PM To: app_rpt List Subject: [App_rpt-users] Kenwood ™-V71 and D710 Remote Base
I picked up a Kenwood ™-V71 Dual Band radio here this week to play with.. It has a full rs-232 serial port on it and supports CAT control. For grins i tried the kenwood control mode in app_rpt and it failed…. running minicom I am able to control it just fine.. can do all the control functions. Looking at the CAT file the commands are the same for the ™-v71 and ™-d710..
I am wondering if somebody would be able to be able to make an update to the control code to add this radio to it's base of control radios.. I have attached the PDF with the commands.. And am able to work with anybody for testing n such..
participants (2)
-
Fredric Moses -
Scott Weis