Date: Wed, 14 Dec 2011 07:02:58 -0900 From: Mark Huelskoetter To: Lu Vencl Subject: Re: [App_rpt-users] Iphone app? Message-ID:
Just about any SIP phone software will work. I use Fring sometimes. I just edit the sip settings to use Allstar to dial in, then all I have to do is dial my node #, enter my user password and choose which way to connect Vox of manual. Best of luck.
Is it possible to use DTMF to control your node if connected via SIP softphone? That might be a neat capability to have. 73. Kyle K0KN
of course it does :-) JIM
From: yokshs@gmail.com To: app_rpt-users@ohnosec.org Date: Wed, 14 Dec 2011 22:38:46 -0600 Subject: [App_rpt-users] Re; Iphone app?
Date: Wed, 14 Dec 2011 07:02:58 -0900 From: Mark Huelskoetter To: Lu Vencl Subject: Re: [App_rpt-users] Iphone app? Message-ID:
Just about any SIP phone software will work. I use Fring sometimes. I just edit the sip settings to use Allstar to dial in, then all I have to do is dial my node #, enter my user password and choose which way to connect Vox of manual. Best of luck.
Is it possible to use DTMF to control your node if connected via SIP softphone? That might be a neat capability to have.
73.
Kyle K0KN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
On Dec 14, 2011, at 11:38 PM, K&R Yoksh wrote:
Is it possible to use DTMF to control your node if connected via SIP softphone? That might be a neat capability to have.
You do anything with SIP you cn do on your radio. I have been controlling my repeater this way since it was set up. Matt Roberts n9gmr@me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142
participants (3)
-
Jim Duuuude -
K&R Yoksh -
Matt Roberts